Adjustable Faux Leather Cage Harness Bra with Studded O-Rings

This black faux leather cage harness bra is built around a distinctive fan-splayed strap configuration on each cup — five narrow straps radiate outward from a center point and are secured at multiple silver stud rivets, creating a structured cage silhouette. Five silver-tone O-rings are positioned across the upper cups and the underbust band, adding hardware weight without bulk. A single center-front buckle lets you step in and adjust the fit without removing the piece entirely.

Styling for Any Occasion

The structured black cage silhouette works as an outer layer over a fitted turtleneck for a cold-weather editorial look, or directly over skin tucked into high-waist trousers for a festival or night-out outfit. The fan-cup geometry photographs well under sheer blouses — the O-rings catch light through the fabric for a subtle layered effect. For a simpler daily look, pair with a black slip dress and let the harness straps show at the neckline.

• Outer layer over a ribbed turtleneck for structured styling
• Worn directly over skin with high-waist wide-leg trousers
• Visible under a sheer blouse for a layered editorial effect
• Tucked under an open blazer at festivals or evening events

Sizing and Fit Range

The underbust band adjusts via a center-front roller buckle, and each shoulder-to-cup strap has its own length adjustment, giving a combined torso fit range of roughly 65 cm to 90 cm underbust circumference. The fan straps are fixed-width — approximately 1 cm each — so the visual spacing between them changes slightly at larger sizes. This harness fits best on a straight or slightly curved torso; very full bust profiles may find the fan geometry sits asymmetrically without a separate bra underneath.

• Underbust band adjusts from approximately 65 cm to 90 cm
• Individual strap width: approx. 1 cm per band
• Center-front buckle for quick on and off
• Not recommended as sole support for cup sizes above D without a base bra underneath

Faux Leather Material and Care

The straps are cut from smooth faux leather (PU-coated fabric) — the surface has a mild sheen that photographs as polished without being overtly shiny in person. Hardware is silver-tone zinc alloy: the O-rings are approx. 2.5 cm interior diameter and the stud rivets are double-capped for durability. Avoid prolonged exposure to direct sunlight or high heat, which can cause PU material to crack over time. Wipe clean with a damp cloth only — do not submerge in water or machine wash.

• Material: PU faux leather over a woven fabric base
• Hardware: silver-tone zinc alloy O-rings and double-cap stud rivets
• O-ring interior diameter: approx. 2.5 cm
• Care: wipe with damp cloth; avoid heat and prolonged sun exposure
• PU surface may show micro-creasing at buckle pressure points over heavy use — a minor trade-off for the price point

Adjustable Straps and Hardware Detail

Beyond the underbust buckle, each of the two shoulder-to-cup runs has a sliding bar adjuster, so the fan sits at the correct height on different torso lengths. The five O-rings are distributed: two at the outer upper corners of each cup, one at the center sternum, and two flanking the underbust band at the front. This placement keeps the hardware symmetrical from the front even when the straps are adjusted to very different lengths. The rivets that pin each fan-strap to the cup junctions are visible and intentional — part of the industrial aesthetic rather than hidden construction details.