Adjustable Full Body Harness with Cross Shoulder & Leg Straps

This two-piece black faux leather harness set consists of an upper chest piece with X-crossing shoulder straps and a separate lower waist-and-leg piece, giving full-body coverage without a single connected garment. The smooth, matte-finish straps measure approximately 1.5 cm wide throughout and are finished with silver-tone metal buckles on every adjustable point.

Cross-Shoulder Chest Piece Details

The upper section forms a triangular frame across the chest and back, with two straps crossing at the center front to create the signature X shape. A horizontal underband sits below the chest and fastens with a classic frame buckle, making the fit fully adjustable from approximately 65 cm to 100 cm around the torso. Riders of all proportions — from petite XS frames to a standard L — can wear this piece without altering its structure.

• X-cross strap layout rests flat against the collarbone and upper chest
• Single underband with punched-hole buckle closure, no hook-and-eye fuss
• Approx. 5 adjustment holes per strap for incremental sizing
• Lightweight upper section — the chest piece alone weighs under 100 g

Waist and Leg Strap Styling

The lower piece wraps the hips with a horizontal band that anchors two vertical thigh loops — one full leg band plus one upper-thigh cuff — all connected by a center front vertical strap. Worn over a bodysuit, leotard, or high-waist trousers, the lower section adds a structured silhouette at the hips. The leg strap fits thigh circumferences from approximately 45 cm to 65 cm; buyers with thighs wider than 65 cm may find the lower section snug. Note: the set works best when the upper and lower pieces are worn simultaneously for the intended full-body proportion.

• Hip band adjustable from approximately 60 cm to 95 cm
• Double thigh loops with individual buckle adjustment
• Silver-tone D-rings on the leg section for optional chain or accessory attachment
• Lower piece can be worn independently as a garter harness

Sizing and Fit Guide

Because every strap adjusts independently, this set accommodates a range of body types. The chest harness suits bust measurements from roughly 70 cm to 100 cm; the upper band runs long enough to tuck or leave as a decorative tail. The lower waist band fits hip measurements from 60 cm to 95 cm. One trade-off: the 1.5 cm strap width means very delicate fabrics worn underneath may show strap pressure marks — pair it over thicker base layers for a cleaner look.

Material and Care

Both pieces use smooth matte faux leather (PU-coated fabric) with no lining, so the inner surface rests directly on skin or clothing. Hardware is silver-tone zinc alloy. To clean, wipe with a damp cloth only — do not submerge in water or machine wash, as prolonged moisture will cause the PU coating to crack. Store flat or hung; avoid folding on the buckle points to prevent crease marks in the material.

• Outer material: PU faux leather, smooth matte finish
• Hardware: silver-tone zinc alloy frame buckles and D-rings
• Care: wipe with damp cloth; air dry away from direct heat
• Do not iron, dry-clean, or machine wash