Piente
Adjustable Strappy Chest Harness
$32.85
Estimated Delivery Date: July 20-22
Color
Please select a color
Size
Please select a size
Discreet Shipping
Plain Packaging
No Content on Invoice
🚚 Discreet packaging — no brand name visible
⚡ Same day dispatch (orders before 2:00 PM)
🔒 256-bit SSL secure checkout
- SKU
- APFT164-S1
- Barcode
- 9,75E+12
- Weight
- 0.200
- Categories
- Chest Harness
Product Details
| Care Instructions | Wipe with damp cloth only; avoid direct sunlight and soaking |
| Lining | No lining; single-layer flat strap construction |
| Closure | Silver-tone pin-and-prong buckles, zinc alloy hardware |
| Material | Smooth PU vegan leather, matte black finish |
Related Searches
Frequently Asked Questions
The adjustable buckles accommodate a chest circumference of approximately 75 cm to 105 cm. Outside that range, the strap length becomes either too slack or too short to sit correctly on the chest.
It works well over clothing — the product photo shows it layered directly over a fitted white button-up shirt. The 1.5 cm flat straps stay visible without bunching fabric underneath.
The buckles are zinc alloy with a silver-tone finish. Under normal indoor and outdoor conditions they resist rust, but prolonged exposure to moisture or salt water can dull the finish over time.
Each shoulder strap has a standard pin-and-prong buckle — the same mechanism as a regular belt. Slide the strap through, align the pin with your preferred hole, and press down. No tools are needed and the whole adjustment takes under 30 seconds.
There is no padding or lining. The straps are a single layer of PU vegan leather approximately 1.5 cm wide, which keeps the profile completely flat under open jackets or blazers.
Product Detail
Black vegan leather chest harness with silver buckles — layers over shirts, dresses, or jackets in seconds.
- ✓Black vegan leather straps, approximately 1.5 cm wide, matte-finish surface
- ✓Silver-tone zinc alloy buckles at each shoulder — adjusts in under 30 seconds
- ✓Fits chest circumference roughly 75 cm to 105 cm via continuous buckle adjustment
- ✓Full harness weighs under 120 g — lightweight enough for all-day layered wear
- ✓Single central sternum connector keeps cross-chest geometry symmetric
- ✓Flat-back construction — no rear hardware bulk under jackets or shirts
- ✓PU vegan leather is not breathable; prolonged bare-skin wear in heat may feel warm
- ✓Wipe-clean care only — do not machine wash or submerge in water
The Adjustable Strappy Chest Harness is a flat-strap, cross-chest accessory built from smooth black vegan leather with a matte finish. Two shoulder straps meet a central connector piece fastened by silver-tone metal buckles, creating a structured cage silhouette that sits cleanly over clothing or directly on skin.
Outfit Pairings and Occasions
This harness works hardest as a layering piece for daily outfits and evening looks alike. The slim strap width — approximately 1.5 cm — keeps proportions balanced over fitted garments.
- Layer over a white button-up shirt and tailored trousers for a polished editorial look, as shown in the product photo.
- Wear over a fitted black turtleneck to blend the straps into a tonal, architectural silhouette.
- Pair with a sheer blouse and blazer for a festival or night-out finish without extra bulk.
- Works equally well as a costume accent for themed events, cosplay, or stage looks.
Sizing and Fit Range
The buckle system on each shoulder strap allows continuous adjustment, making this harness suitable for a chest circumference of roughly 75 cm to 105 cm. The cross-chest layout sits best on flat-to-medium torso profiles; very deep busts may find the central connector rides slightly high. One size fits most; people outside the 75-105 cm range should measure before ordering.
- Adjustable shoulder straps: approximately 35-55 cm extended length each.
- Central chest band: fixed connector with two silver-tone side buckles for tension.
- Strap width: 1.5 cm flat — stays visible without overpowering an outfit.
- Not recommended for chest circumferences below 70 cm or above 110 cm without custom adjustment.
Vegan Leather Material and Care
The straps are cut from smooth PU vegan leather with a slight sheen, stitched along the edges for shape retention. Hardware is silver-tone zinc alloy — lightweight enough that the full harness weighs under 120 g. The trade-off: PU leather is not as breathable as textile options, so prolonged wear against bare skin in warm weather may feel warm. Wipe clean with a slightly damp cloth; avoid prolonged exposure to direct sunlight to prevent surface cracking. Do not machine wash or soak.
Construction Details
Each buckle uses a standard pin-and-prong mechanism — the same found on everyday belts — so adjusting fit takes under 30 seconds without tools. The straps connect at a single central D-ring-style rivet at the sternum, keeping the geometry symmetric. No additional padding or lining is used, which keeps the profile flat and discreet under open jackets.
- Four individual strap segments joined at the central sternum connector.
- Six adjustment points total (two per shoulder strap, one per chest side band).
- All metal hardware: silver-tone zinc alloy, non-rust under normal indoor conditions.
- Flat-back design with no protruding hardware on the reverse — comfortable against a shirt or skin.
WHAT OTHER PRODUCTS ARE AVAıLABLE in OUR OTHER CATEGORIES?
Adjustable Strappy Chest Harness
$32.85
