Adjustable Strappy Chest Harness with O-Ring Halter Neck

$37.35

Be the first to write one!

Estimated Delivery Date: July 20-22

Color

Please select a color

Size

Please select a size

Discreet Shipping

Plain Packaging

No Content on Invoice

🚚 Discreet packaging — no brand name visible

⚡ Same day dispatch (orders before 2:00 PM)

🔒 256-bit SSL secure checkout

SKU: APFT34-AI-NB-V1-S1
Weight: 0.200
Categories: Chest Harness

Product Details

Care Instructions	Wipe clean with damp cloth; air dry flat; do not machine wash
Lining	No lining; single-layer faux leather straps
Closure	Adjustable buckle on halter neck strap and waist bands
Material	Faux leather (PU); silver-tone metal O-rings and rivet studs

Frequently Asked Questions

The adjustable halter neck and waist bands accommodate a chest circumference of roughly 75 cm to 100 cm. The fixed diagonal cage straps do not stretch sideways, so sizing above 100 cm will feel constrictive across the chest.

The two leg straps are fixed to the base waist band and terminate in silver O-rings. They are not removable, but they can be tucked into high-waisted bottoms or left hanging freely — each strap hangs approximately 25 cm below the waist section.

The straps are approximately 1.5 cm wide flat faux leather bands. All hardware — the halter O-ring, the two bottom O-rings, and the rivet studs at each strap crossing — is silver-tone metal.

The harness works over fitted tops, bodysuits, or sheer blouses as a fashion layer. The cage strap geometry stays visible over thin fabrics; bulkier knits will hide the crossing pattern and may interfere with the waist band fit.

Wipe the PU faux leather straps with a slightly damp cloth and air dry flat. Avoid submerging in water or machine washing, as sustained moisture weakens the PU bonding layer over the rivet points.

Product Detail

Black faux leather chest harness with crossing cage straps, silver O-ring halter neck, and adjustable waist bands.

✓Five-point crossing cage strap pattern formed by approximately 1.5 cm wide faux leather bands
✓Silver O-ring at halter neck plus two O-rings at bottom leg strap ends
✓Silver rivet studs at every strap junction lock geometry in place during wear
✓Adjustable halter neck and waist bands fit chest circumference roughly 75 cm to 100 cm
✓Two waist encircling bands with additional front adjustment for mid-torso security
✓Two dangling leg extension straps hang approximately 25 cm below the waist section
✓Fixed diagonal cage geometry does not widen — not recommended above 100 cm chest
✓Faux leather PU material; wipe-clean only, not suitable for machine washing

This black faux leather chest harness features a geometric crossing-strap cage pattern across the torso, anchored by a silver O-ring at the halter neck and secured with silver rivets at every junction. Two adjustable waist bands hold the fit close to the body, and two dangling leg straps terminating in silver O-rings extend from the base — a detail that sets it apart from simpler single-band chest pieces.

Strap Design and Hardware

The harness uses approximately 1.5 cm wide flat faux leather straps that cross diagonally over the chest in a five-point cage formation. Every strap crossing is reinforced with a silver metal rivet stud, keeping the geometry locked in place during wear. The halter neck strap connects to a round silver O-ring at the chest center, while two matching O-rings finish the dangling leg extensions at the bottom.

Five-point diagonal crossing strap pattern over the chest cage area
Silver O-ring at halter neck and two additional O-rings at leg strap ends
Silver rivet studs at every strap junction for structural stability
Approximately 1.5 cm strap width throughout the harness
Two waist encircling bands for secure mid-torso fit

Styling and Occasion

Worn over a fitted black turtleneck, this chest harness adds defined structure to a minimalist winter outfit without adding bulk. Alternatively, layer it over a plain white mesh top for a festival-ready contrast that highlights the crossing strap geometry. The dangling leg straps can be tucked into high-waisted trousers or allowed to fall freely over the hips for a different silhouette. This piece suits everyday fashion layering, music events, and editorial photoshoots equally well.

Layer over fitted tops, bodysuits, or sheer blouses for contrast
Pair with high-waisted skirts or trousers to frame the waist bands
Use the dangling leg O-ring straps as a hip accent or tuck them away

Sizing and Fit

The halter neck strap and waist bands include multiple adjustment points, giving a wearable range from approximately 75 cm to 100 cm chest circumference. The harness sits best on a torso length of 40 cm to 55 cm from shoulder to hip. Note that the crossing straps are fixed in their geometric pattern — they do not expand sideways, so buyers with a chest circumference above 100 cm may find the cage straps tight. The leg straps are not adjustable in length and hang approximately 25 cm below the waist band.

Material and Care

The straps are made from faux leather (PU material) with a smooth, matte-finish surface that holds its shape without creasing under the rivet points. The hardware — rivets and O-rings — is silver-tone metal. To maintain the strap finish, wipe clean with a slightly damp cloth and allow to air dry flat; do not submerge in water or machine wash, as prolonged moisture will soften the PU bonding. Store flat or loosely rolled to prevent permanent kinks in the strap geometry.