Deri ve Melek Kanadı Detaylı Şık Harness

The Angel Wing Faux Leather Body Harness is a chest harness built around a pair of die-cut white faux leather wings that span across both shoulder blades, connected by silver O-rings and a vertical spine strap that anchors at the waist. Unlike a standard strappy harness, the wings are the structural element — layered feather panels that sit flat against the upper back for a clean silhouette.

Wing Structure and Hardware

Each wing panel is cut from smooth white faux leather with individual feather-shaped layers stacked outward from a central ridge. The panels attach to the shoulder straps via silver metal O-rings approximately 3 cm in diameter. A single vertical strap runs down the spine connecting a second O-ring at mid-back to a third at the waist, keeping the whole harness from shifting during wear.

• Layered feather cut-outs give the wings a three-dimensional profile without added bulk
• Three silver O-rings — one at each shoulder junction, one at the lower spine
• Vertical spine strap approximately 1.5 cm wide keeps the frame stable
• Shoulder straps loop over the top of each shoulder to bear the wing weight

Sizing and Fit Notes

The harness is designed for torso circumferences between 70 cm and 95 cm, with adjustable buckle points on the shoulder and waist straps. The wing span measures approximately 40 cm tip-to-tip, so wearers with very narrow or very broad shoulders should note that the wings may sit asymmetrically. The fit works best on a straight-back posture — the spine strap sits directly along the vertebral line and can feel restrictive if bent forward for extended periods.

• Adjustable shoulder straps fit bust sizes roughly 75 to 100 cm
• Waist strap adjustable from 60 cm to 90 cm
• Wing panels are rigid — not suitable for layering under close-fitting tops
• One size with multiple adjustment points; petite frames may find waist excess strap visible

Styling and Occasion Ideas

Worn over a sheer white bodysuit or bare skin, the harness reads as a costume centrepiece for festival season, Halloween, or themed photo shoots. Pair it with high-waisted black leather-look trousers and ankle boots for a street-editorial look where only the back detail is visible when a jacket is removed. For a lingerie-inspired set, layer over a white bralette and matching white shorts — the wing silhouette frames the back for content creation. The white colorway also photographs cleanly against both dark and neutral backgrounds, making it a practical choice for studio shoots.

Material and Care

The harness is constructed from smooth PU faux leather with no fabric lining on the wing panels; the underside shows the backing material of the faux leather sheet. The hardware is zinc-alloy O-rings with a silver-tone finish — avoid prolonged exposure to moisture to prevent tarnishing. Wipe the faux leather panels with a dry or very slightly damp cloth; do not submerge in water, do not machine wash, and store flat or hanging to prevent creasing the wing panels, as sharp folds can crack the PU surface over time.