Black Diamond Faux Leather Body Harness Top

The Black Diamond Faux Leather Body Harness Top is built around six geometric diamond-cut panels of matte black faux leather, each approximately 10 cm wide, joined edge-to-edge with small silver O-rings and link chain. Unlike solid bralette-style harnesses, the open diamond grid leaves deliberate negative space between panels, making it lighter to wear and far more visually dynamic against any base layer.

Silver Chain Strap Construction

Thin silver-tone link chains run from each shoulder down to the top row of diamond panels, then continue as a horizontal span across the chest before anchoring at the sides. The O-rings at every junction are the structural hinge points — they allow a small degree of flex so the panels shift naturally with movement rather than sitting rigid. The chain shoulder straps are not length-adjustable, so this detail is important for fit.

• Six matte black faux leather diamond panels, each roughly 10 cm at widest point
• Silver-tone link chain shoulder straps with connecting horizontal span
• Small silver O-rings at every panel junction — functional pivot points
• Open geometric grid leaves skin visible between panels — not a full coverage top
• No back closure — harness slips on over the head like a vest

How to Style for Daily or Occasion Wear

Worn over a fitted black turtleneck, the diamond panels read as structured outerwear and work for gallery openings or creative-industry events. For a night-out combination, layer it directly over skin with high-waisted wide-leg trousers and a blazer draped over the shoulders — the horizontal chain across the chest acts as a natural focal point without needing additional necklaces. Festival styling pairs it with fishnet bodystocking underneath to fill the negative space between panels while keeping the geometric silhouette visible. Because it has no bulk at the back, it sits cleanly under open-back outerwear.

• Over a black turtleneck for structured, office-adjacent styling
• Over bare skin with wide-leg trousers and a draped blazer for evening events
• Layered over fishnet for festival or street-fashion looks
• Under an open-back jacket to keep the chain detail visible at the neckline

Sizing and Fit Notes

The harness is sized as a one-size garment fitting bust circumferences approximately 80–95 cm. The fixed-length chain shoulder straps mean the vertical drop from shoulder to the lowest diamond panel is set — wearers taller than 175 cm or with a torso longer than 45 cm may find the bottom panels sit lower than the underbust. Because coverage is provided by six panels rather than a continuous band, there is no underwire or structured cup — wear a supportive bralette underneath if additional shaping is needed. Not recommended for bust sizes above 95 cm as the O-ring junctions will be under tension and may distort the diamond shape.

Material and Care

The diamond panels are cut from smooth matte faux leather (PU-coated polyester) — the surface has a low sheen rather than a high-gloss patent finish, which photographs well and does not show fingerprints as readily as glossy alternatives. The chain and O-rings are silver-tone base metal; extended contact with sweat may cause slight tarnishing over time. Wipe panels with a damp cloth only — do not machine wash or soak. Store flat or on a hanger to prevent the chain from kinking. The faux leather panels may stiffen slightly in cold storage but return to flexibility at room temperature.