Black Faux Leather Back Chain Body Harness

This black faux leather body harness is built around a single showpiece detail: a curtain of silver-toned chains that spans the entire back, anchored at the shoulders and gathered at the waist by a structured faux leather band. Unlike minimalist strap harnesses, the chain coverage here is dense — roughly 8 to 10 parallel drapes — creating a layered, almost architectural effect across the upper and mid-back.

Back Chain Construction

The chains are attached to two thick black shoulder straps (approximately 2 cm wide) and collected at the lower back by a horizontal faux leather band with a central O-ring. The silver-toned metal links are fine gauge, so the chains move with the body rather than staying rigid. All connecting hardware — O-ring, lobster clasps, and strap adjusters — is silver-tone metal, keeping the palette consistent. The waist band sits at or just below the natural waist and includes a simple buckle closure for secure fastening.

• Approximately 8-10 cascading silver chains spanning shoulder blades to waist
• Black faux leather shoulder straps, approx. 2 cm wide
• Horizontal waist band with central silver O-ring anchor
• Silver-tone buckle and lobster-clasp hardware throughout
• Trade-off: the dense chain panel is a back-only feature — the front straps are plain, so the drama reads from behind or in profile

Styling and Occasion

The back chain detail is designed to show over open-back garments. Pair it with a white open-back tank or bodysuit and high-waist leggings for an evening-out look where the harness is the centerpiece. For a festival or concert outfit, layer it over a sheer black mesh top so both the chains and the back strap construction are visible. The adjustable shoulder straps mean the chain fall can be positioned higher or lower depending on the neckline of the layer beneath.

• Worn over open-back tops for evening bar or club outings
• Layered over sheer mesh for festival or concert styling
• Pairs with high-neck bodysuits to let the back do all the work

Sizing and Fit Notes

The shoulder straps are fully adjustable with sliding buckles, accommodating a torso length from approximately 40 cm to 55 cm (measured shoulder to natural waist). The waist band adjusts to fit hip and waist circumferences of 60 cm to 100 cm, covering most XS through XL body types. The harness is a surface-layer accessory worn over clothing, so standard size tolerances are forgiving — buyers between sizes should size up for the waist band. The chain length between shoulder anchor and waist band is fixed; very long torsos (above 55 cm) may find the waist band sits above the hip rather than at it.

Material and Care

The straps and waist band are vegan faux leather (PU) — smooth-grain finish with a slight sheen. The chains are base-metal alloy with silver-tone plating; avoid prolonged contact with moisture or perfume to protect the finish. Wipe the faux leather sections with a dry or lightly damp cloth only — no machine washing, no soaking. Store flat or hanging to prevent the chains from tangling. The hardware connections are stitched and riveted, not just glued, adding to overall durability under regular wear.