
Piente
Color
Please select a color
Size
Please select a size
| Care Instructions | Wipe clean with damp cloth; air dry flat; no machine wash |
| Lining | Fabric-backed PU interior, no padding |
| Closure | Metal pin buckles on chest sides; fixed choker loop |
| Material | PU faux leather straps with matte smooth finish |
Related Searches
Structured black faux leather harness with silver O-rings, choker band, and geometric chest cage silhouette.
This black faux leather body harness is built around a three-tier strap architecture: a structured choker collar at the neck, a geometric chest cage centered on a single silver O-ring, and a hip band anchored by a second O-ring at the lower front. The result is a defined, sculpted silhouette that sits flat against the body without bulk.
The chest section forms a symmetrical frame using four diagonal straps that converge at the central O-ring. Two side-mounted metal buckles — positioned at roughly mid-torso — allow independent adjustment on each side, so the cage can be tightened or loosened without altering the choker or hip band separately. The straps are approximately 1 cm wide, narrow enough to wear beneath sheer or mesh tops without visible bulk at the edges.
Worn over a white fitted turtleneck, the black straps create a sharp graphic contrast suited to weekend street wear. For an evening look, layer it over a satin slip dress — the O-ring sits at bust height and reads as jewelry rather than hardware. The hip band lands below the natural waist, which makes it compatible with high-waisted trousers or skirts without the band disappearing into the waistband.
The harness is built for torso circumferences between approximately 70 cm and 90 cm at the chest and 65 cm and 85 cm at the hips. The choker collar has a fixed diameter — buyers with a neck circumference above 38 cm may find the collar sits tightly and should size up or consider an open-collar style instead. Adjustment buckles give roughly 6 cm of range on each side of the chest section, which covers most standard European sizing from XS to L.
Petite to medium frames benefit most from the proportions: the three-tier layout adds vertical length, which suits shorter torsos. On very tall frames (above 175 cm), the hip band may sit higher than intended, closer to the natural waist than the hip crest.
The straps are faux leather (PU-coated fabric) — smooth on the outer surface with a matte finish visible in low light. Hardware is silver-tone zinc alloy, which resists surface tarnish under normal wear but should not be submerged. To clean, wipe the straps with a damp cloth and mild soap, then air dry flat away from direct heat. Do not machine wash or tumble dry, as moisture penetrating the PU layer can cause edge peeling over time. Stored flat or on a hanger, the straps hold their shape without crease marks.
Black Faux Leather Body Harness with O-Ring Hardware
$40.35No reviews yet.
You can only review products you have purchased and received.