Black Faux Leather Full Body Harness with O-Ring Hardware

This black faux leather full body harness runs from a shoulder-neck strap down through three horizontal chest bands, a waist belt, and a V-shaped lower cage that sits across the hips — all connected by silver rectangular buckles and O-ring hardware at every junction. The straps measure approximately 1.5 cm wide, keeping the silhouette graphic and flat against the body without bulk.

Chest-to-Hip Strap Configuration

Unlike a simple waist harness, this piece layers four distinct horizontal bands: one sits above the bust line, one at mid-chest, one at the natural waist, and the final band anchors the V-frame that drops toward the hips. Each band is individually adjustable via its own silver buckle, so you can dial in fit at each zone independently.

• Shoulder loop connects to upper chest band via two silver O-rings
• Three horizontal torso bands with individual rectangular buckles
• V-cage lower section with four stacked silver buckles on center front
• Smooth flat faux leather strap width: approximately 1.5 cm
• All hardware silver-tone metal — no gold or mixed finishes on this piece

Styling and Occasion

Worn over a sheer black bodysuit or a fitted turtleneck, the harness adds a structured graphic layer that photographs well for editorial or night-out looks. The lower V-cage sits naturally over high-waisted trousers or a midi skirt, framing the waist without competing with the garment. For a boudoir or lingerie context, the harness wears alone over bare skin — the multiple bands create visual segmentation across the torso. Avoid pairing with heavily textured knits, as the flat straps can ride up on thick fabric.

• Over a sheer bodysuit for a night-out editorial look
• Over a fitted turtleneck with high-waisted trousers for layered street style
• Worn alone against bare skin for boudoir or lingerie photography
• Under an open blazer or jacket for a subtle structured accent

Sizing and Fit

The multi-buckle construction means each band adjusts independently. The chest bands fit a bust circumference of roughly 70-100 cm, and the waist band adjusts across a 60-90 cm waist range. The lower V-cage length is fixed at the factory and sits best on torso lengths of 40-50 cm (measured from shoulder base to hip bone). If your torso is shorter than 38 cm, the V section may extend past the hip and not sit flat — this is the one trade-off of the fixed lower frame design. One-size construction; not suitable for plus-size torsos above approximately 100 cm bust.

Material and Care

Straps are cut from smooth faux leather (PU-coated fabric) — not genuine leather. The material resists minor moisture but should not be submerged. Wipe clean only with a slightly damp cloth; avoid alcohol-based cleaners which can crack the PU surface over time. Hardware is silver-tone zinc alloy — keep dry to prevent tarnishing. Store flat or hanging to avoid permanent creasing of the straps.

• Strap material: PU faux leather — not genuine animal leather
• Hardware: silver-tone zinc alloy rectangular buckles and O-rings
• Care: wipe clean only — no machine washing, no soaking
• Store flat or on a hanger — folding can leave permanent crease marks on PU