Body Harness with Adjustable Straps & Dangling Chains

This black faux leather body harness wraps the torso in two horizontal bands connected by a central vertical strap, anchored at the chest by a silver metal O-ring. Thin silver chains drape across both the chest panel and the lower waist band, creating layered movement with every step. The hardware throughout is silver-tone, matching the chain links for a cohesive look.

Chest & Waist Strap Design

The harness consists of a collar-style choker loop at the neck, a chest-level horizontal band, and a lower waist band — all joined by a single front vertical strap. Four adjustable buckles let you tighten or loosen each section independently. The chest strap sits approximately 3-4 cm wide and the waist band mirrors the same width, giving a structured silhouette without bulk. Dangling chain segments hang from the lower band and move freely, reaching roughly 8-10 cm below the waist strap.

• O-ring diameter approximately 4 cm, silver-tone metal, attached at the chest center
• Two horizontal bands — one chest-level, one waist-level — joined front and back
• Silver draped chains across both bands add visual depth
• Four metal buckle closures for independent adjustment on each section

Sizing & Fit

The adjustable buckles accommodate a chest circumference of roughly 70-100 cm and a waist circumference of approximately 65-95 cm. The harness fits most XS through L body frames comfortably. If your torso is longer than average, the distance between chest and waist bands may sit slightly lower than shown; if shorter, the bands will sit closer together. Those with a torso length above 40 cm (underarm to hip) should note the waist band may ride at the hip rather than the natural waist.

• Chest range: approximately 70-100 cm circumference
• Waist range: approximately 65-95 cm circumference
• Fits XS to L; longer torsos should check torso length before ordering
• Buckle straps allow micro-adjustments of about 1 cm per notch

Material & Care

The straps are cut from vegan faux leather — a smooth PU surface with slight texture on the inner face for grip against skin. The chain links are lightweight zinc alloy, plated silver, and will not tarnish quickly under normal wear. To clean, wipe the straps with a damp cloth and mild soap; do not submerge in water or machine-wash, as prolonged moisture can cause the PU surface to peel at the edges. Store flat or loosely coiled to prevent permanent kinks in the strap.

• Strap material: PU faux leather — smooth outer face, slight texture inside
• Chain links: zinc alloy with silver-tone plating
• Hardware: silver-tone metal buckles and O-ring
• Care: wipe clean with damp cloth — do not machine-wash or soak
• Honest trade-off: PU edges may show wear after frequent bending at the buckle points

Styling & Occasions

For a festival outfit, layer this harness over a plain black crop top or directly over a ribbed bodysuit — the chains rest on top of fabric cleanly. Paired with high-waisted wide-leg trousers and chunky boots, the waist band draws the eye to the midsection for a structured silhouette. For a night-out look, wear over a sheer mesh long-sleeve top: the black straps contrast against the mesh, and the silver chains catch light without adding extra accessories. The harness also works under an open blazer with no shirt for an editorial wardrobe styling that keeps the chain detail visible. This is a daily-use fashion accessory as much as a statement piece — the adjustable fit means it can be loosened for comfort during long wear.