Body Harness with Draped Chain Fringe

This black faux leather body harness is built around a geometric cage structure with a built-in choker collar, dual O-rings at the chest and waist, and three tiers of cascading silver chain fringe — one at the collar, one framing the bra-line, and one along the lower waistband. The overall silhouette forms a symmetrical spider-web pattern of straps that sits flat against the torso without bulk.

Chain Fringe Construction

The chain fringe is the defining feature of this harness. Thin silver-tone metal chains hang freely at three levels, moving with the body for a kinetic effect that solid-strap harnesses cannot replicate. The collar alone carries a full row of draping chains, while the chest section features angled chains running from the central O-ring outward to each side. The waistband fringe is the longest tier, falling below the hem of the harness for visible layering over high-waisted bottoms.

• Triple-tier silver chain fringe at collar, chest, and waist levels
• Central chest O-ring and lower waist O-ring in silver-tone metal
• Silver stud/eyelet detailing along every strap edge
• Chains move independently — no fixed mesh, no rigid backing

Styling and Occasion

This harness layers over a white or nude fitted top for a contrast-heavy streetwear look, or sits directly over bare skin under a sheer blouse for festival and club styling. Pair it with high-waisted wide-leg trousers so the waist fringe skims the waistband — the chains add movement without adding visual bulk to the hip. Over a plain black bodysuit, the silver fringe becomes the sole focal point. The harness also works under an open blazer for an editorial outfit that reads structured from the front and textured from the side.

Sizing and Fit

The adjustable strap closures allow the harness to fit a chest circumference of approximately 70 cm to 100 cm and a waist range of roughly 60 cm to 90 cm. The collar sits flat and closes at the back of the neck — it is not adjustable in circumference, so buyers with a neck size above 38 cm should measure before ordering. The straps are narrow at approximately 1.5 cm width, which gives a cage effect on most torso sizes but may feel less defined on very petite frames. This is a one-size-adjustable piece; it is not suited to plus sizes above approximately 2XL.

• Chest fit range: approximately 70 cm to 100 cm circumference
• Waist fit range: approximately 60 cm to 90 cm circumference
• Collar circumference: fixed, suits up to approximately 38 cm neck
• Strap width: approximately 1.5 cm — gives geometric cage lines on standard frames
• Not recommended for plus sizes above 2XL

Material and Care

The straps are made from faux leather (PU-coated fabric), which holds its shape without creasing and wipes clean easily. The chain fringe and hardware are silver-tone alloy metal — note that the chains are decorative and not rated for weight-bearing use. Do not machine wash; wipe the straps gently with a damp cloth and allow to air dry flat. Avoid prolonged exposure to moisture, which can cause the PU surface to soften. Store the harness hanging or flat to prevent chain tangling.

• Faux leather PU straps — wipe clean with damp cloth only
• Silver-tone alloy chain fringe and O-ring hardware
• Do not machine wash or submerge in water
• Store hanging or flat to keep chains untangled