Caged Chest Harness with High Collar and O-Rings

This black faux leather chest harness is built around a cage-style bust frame of five horizontal straps, each fitted with individual side-release buckles so the fit can be dialed in at every band independently. The high choker collar is integrated — not a separate piece — and connects to the cage via thin shoulder straps terminating at a central silver O-ring, giving the whole piece structural continuity rather than a layered-on look.

Cage Construction & Hardware

The cage section spans roughly the full bust width and sits flush against the torso when sized correctly. Hardware throughout is silver-tone metal:

• Five horizontal cage bands across the bust, each individually adjustable with a side-release buckle on both left and right
• Central O-ring at chest center where collar straps converge — approximately 2 cm diameter
• Thin shoulder straps, approximately 0.8 cm wide, extend from collar to cage frame
• High choker collar sits at mid-neck height, roughly 4 cm tall at front
• All buckles are matte silver-tone metal; the faux leather itself has a slight gloss finish

How to Style for Any Occasion

Worn over a white bodysuit or fitted tank, the black cage creates a strong graphic contrast — the look in the product photo with white high-waist leggings is a practical starting point for a night out. For a festival or editorial outfit, layer it directly over bare skin with high-waisted wide-leg trousers and a longline blazer. The choker height works best with an open or low neckline; crewnecks will compete with the collar and obscure the top straps. Because the piece sits only on the upper chest, it does not interact with waistbands or skirts below.

Sizing & Fit

The harness is designed to fit a bust circumference of approximately 75 cm to 105 cm when all five cage bands are adjusted fully. The shoulder straps add a few centimeters of reach between collar and cage, so longer torsos are accommodated without the collar pulling downward. The choker portion fits neck circumferences of roughly 32 cm to 40 cm; those with a neck larger than 40 cm may find the collar visually tight even at its loosest setting. This is a chest-only harness and does not include waist or leg straps — buyers looking for a full-body configuration will need additional pieces.

• Bust range: 75 cm – 105 cm adjusted across five buckle points
• Choker fit: 32 cm – 40 cm neck circumference
• Shoulder strap length is fixed, not adjustable — suits most standard torso lengths
• Fits curvy and plus-size frames well; the cage spacing widens proportionally under tension
• Not suited for bust circumferences below 70 cm — straps will not lay flat

Material & Care

Straps and collar are cut from PU faux leather, which gives the gloss surface visible in the image without using animal-derived material. The hardware is zinc-alloy with a silver electroplate finish — it will not rust in normal wear but should be kept away from extended moisture. To clean, wipe each strap individually with a damp cloth and mild soap; do not submerge, do not tumble dry, and store flat or rolled (not folded at sharp angles) to prevent crease marks in the faux leather. The buckle prongs can catch delicate fabrics, so store separately from knitwear.