Caged Chest Harness with High-Neck Collar

The Caged Chest Harness with High-Neck Collar is built from narrow black faux leather strips arranged in a diamond-grid cage pattern, anchored by a structured 2 cm wide collar band that sits snugly around the neck. Silver-tone rivets and O-rings appear at every strap intersection, creating a geometric lattice across the chest without additional padding or lining underneath.

Collar Construction and Strap Layout

The wide collar panel closes at the back with a metal buckle, providing a firm anchor point for the cage below. From the collar, multiple vertical and horizontal straps — each approximately 1 cm wide — fan outward to form nine to twelve diamond-shaped openings across the chest area. The bottom hem is cut on a slight angle, longer at one side, giving the silhouette an asymmetric finish that reads differently depending on how you layer it.

• Structured collar band, approximately 2 cm wide, with rear buckle closure
• Diamond cage formed by 1 cm wide faux leather straps at horizontal and vertical intervals
• Silver-tone O-rings positioned at every grid intersection
• Asymmetric cut at the lower hem adds an angular, editorial line
• All-black body with contrasting silver hardware throughout

How to Style and Occasion

Worn over a fitted black turtleneck, the collar merges with the neckline so only the cage detail reads across the chest — a subtle way to add texture to a monochrome outfit. For a bolder approach, layer it directly over a sheer mesh long-sleeve top at a festival or late-night event: the diamond openings frame the fabric underneath and the O-rings catch ambient light. The harness also works flat against skin under an open blazer, where the structured collar holds its shape without a base layer.

• Layer over turtleneck for a tonal, textured club-night look
• Wear over sheer mesh at open-air festivals for maximum visual impact
• Pair with an open blazer and high-waist trousers for an editorial street style combination

Sizing and Fit Details

The collar buckle allows approximately 4 cm of neck circumference adjustment, suitable for neck sizes from roughly 30 cm to 40 cm. The chest cage itself is not individually adjustable — it falls as a fixed grid, so wearers with a bust measurement between 75 cm and 95 cm typically find the cage sits centered on the chest. Wearers outside this range may notice the grid shifting slightly off-center; the harness does not accommodate cup volume variation since there is no cup structure. One honest trade-off: because the straps are fixed-width and non-stretch, wearers at the upper end of the size range may feel moderate strap tension across the torso.

Material and Care Instructions

The straps are cut from faux leather (PU-coated fabric), which holds its shape and matte black finish well but should not be machine washed or submerged in water. Wipe down with a soft damp cloth to remove surface dust or smudges, then air dry flat. Avoid prolonged exposure to direct sunlight, which can cause the PU coating to lighten or crack over time. The silver-tone hardware is zinc alloy — keep it dry to prevent tarnishing. Store flat or on a hanger to avoid permanent creases in the straps.

• Faux leather (PU-coated) straps resist light moisture but are not waterproof
• Zinc alloy silver-tone hardware — keep dry to maintain finish
• Wipe clean with damp cloth only; no machine wash, no soaking
• Store flat or on hanger to prevent strap creasing