Caged Faux Leather Body Harness with Multi O-Ring Straps

This black faux leather body harness is built around a caged cross-strap chest structure — two diagonal bands intersecting in an X formation above a horizontal mid-strap, all anchored by a firm lower waistband. Unlike simple two-strap designs, the cage geometry creates visible negative space that works intentionally over a sheer top or structured blazer. Strap width measures approximately 1.5 cm throughout, keeping the silhouette graphic without adding bulk.

Hardware and Construction

Every junction is finished with a silver-tone metal O-ring or rivet, giving the harness its signature industrial edge. The hardware sits flush against the strap surface rather than floating freely, so the piece lays flat when worn. Two prominent O-rings frame the front waistband center point, doubling as anchor details for accessory clipping if needed.

• Multiple silver O-rings at chest cross points, waist center, and shoulder junctions
• Silver-tone rivets reinforce each strap connection point
• Smooth, glossy black faux leather surface on approximately 1.5 cm wide bands
• Firm lower waistband provides structure without a boning layer
• Snap or buckle closures allow on-body adjustment without removing the piece

How to Style for Different Occasions

For a night-out look, layer the harness over a fitted black turtleneck — the caged straps remain visible through thin knit fabric and add dimension to an otherwise flat silhouette. For a festival or concert outfit, wear it directly over a simple white or cream bandeau so the full cage geometry shows clearly. The piece also reads well over a structured denim jacket left unbuttoned, where the waistband rests at jacket hem level and the crossed straps emerge above.

• Over a sheer black turtleneck for an editorial street-style look
• On top of a fitted crop top at outdoor music events
• Layered above a blazer for an avant-garde office-to-evening transition
• Paired with high-waist trousers so the waistband aligns with the trouser waistline

Sizing and Fit Notes

The harness is designed to fit a bust circumference of roughly 80-95 cm and a waist of 65-85 cm; the adjustable closures on the shoulder straps and waistband provide several centimeters of range. Wearers with a wider torso above 100 cm bust or a waist above 90 cm may find the cross-straps sit higher than intended. The vertical distance from shoulder to waist on this design suits a torso length of approximately 38-44 cm (under-bust to shoulder). One trade-off: the fixed cage geometry means the cross point of the X straps cannot be repositioned — it sits at mid-chest by design.

Material and Care

The straps are constructed from faux leather (PU coated fabric backing) — no animal-derived materials. The glossy surface resists light moisture but is not waterproof; avoid prolonged contact with water or perfume directly on the straps. Wipe clean only with a slightly damp cloth; do not machine wash, tumble dry, or iron. Store flat or loosely coiled to prevent creasing at the strap bends. The rivet hardware is zinc alloy with a silver-tone finish; avoid abrasive surfaces that could scratch the plating.