Crimson Patent Halterneck Body Harness

The Crimson Patent Halterneck Body Harness is a deep crimson patent faux leather chest harness that spans from a fitted choker neckband down to a structured waist strap, connected by diagonal and horizontal strap panels. Three silver-tone O-rings anchor the geometry — one at the throat, one at the chest center, one at the waist — giving it a distinct tiered silhouette that sits firmly against the torso without slipping.

Strap Layout and Hardware

The choker neckband sits approximately 1.5 cm wide and connects via a front O-ring to two diagonal straps that angle outward across the chest before meeting a horizontal mid-chest band. A second horizontal strap runs at the waist level, both bands held together by a larger center O-ring roughly 3 cm in diameter. Silver stud rivets appear at every strap junction — visible reinforcement points that also act as decorative accents.

• Choker neckband approximately 1.5 cm wide with front O-ring attachment
• Diagonal chest straps cross from neck to waist at roughly 45-degree angle
• Three silver-tone O-rings: neck, chest center, and waist
• Waist O-ring approximately 3 cm diameter — visible focal point at front
• Stud rivets at all strap intersections for reinforced construction

Styling and Occasion

Over a white fitted button-down shirt — as shown — the crimson straps contrast cleanly against pale fabric, making each strap line visible without competing with a print. For evening wear, layer over a black bodysuit or slip dress: the waist O-ring lands at the natural waist and acts as a visual anchor. The halterneck format also works over cropped turtlenecks in autumn, where the choker merges with the collar line for a seamless look. Note that the harness sits best on form-fitting tops; voluminous or heavily textured base layers can push the straps out of alignment.

• Layer over a white or black fitted shirt for a sharp contrast look
• Wear over a bodysuit for going-out or club styling
• Pair with a slip dress for a layered evening outfit
• Combine with a cropped turtleneck for cooler-weather wear

Sizing and Fit

The harness is designed with adjustable buckle closures on the shoulder and waist straps, accommodating a bust circumference of approximately 75 cm to 100 cm and a waist range of roughly 65 cm to 90 cm. The choker neckband fits neck circumferences of approximately 32 cm to 40 cm. Wearers with a longer torso — above 50 cm neck-to-waist — may find the diagonal straps pull tighter across the chest; sizing up on the shoulder strap adjustment compensates for this. The harness is not designed to provide structural support, so it sits as an overlay accessory rather than a fitted garment.

Material and Care

The straps are made from patent faux leather (PU coated), which gives the glossy lacquer-finish surface visible in the deep crimson color. The hardware — O-rings, stud rivets, and buckles — is silver-tone zinc alloy. PU patent material is not breathable, so extended wear against bare skin may feel warm; wearing over a base layer is recommended for comfort. To clean, wipe the straps with a damp cloth and mild soap only — do not submerge in water or machine wash, as submersion weakens the PU bonding at the stud rivet points. Store flat or hung to avoid permanent crease lines in the patent finish.