Deri Fantazi Giyim Ürünleri Harness

This black faux leather harness spans from a choker-width collar strap down a single vertical chest strap to a triple-O-ring waist section — a structure that sets it apart from standard single-ring cage designs. The straps measure approximately 1 cm wide, keeping the silhouette graphic without adding bulk, and three silver-tone O-rings sit clustered at the waist front as the focal point.

Strap Layout and O-Ring Detail

The design starts with a smooth collar band that closes at the back, feeds a center strap down the sternum, and terminates at a waist band built from two parallel horizontal straps. The three staggered silver-tone O-rings — one above and two flanking below — are fixed with silver rivet studs that also reinforce every strap junction. The hardware is a cool silver finish, contrasting cleanly against the matte black faux leather.

• Three-ring waist cluster with one center and two side O-rings for visual depth
• Approximately 1 cm strap width throughout the entire piece
• Silver rivet studs at every strap junction for structural reinforcement
• Collar-to-waist span covers approximately 40-55 cm depending on torso length

How to Style This Harness

Worn over a fitted nude or white bodysuit — exactly as shown in the product image — the black straps read as a graphic overlay and the O-rings add hardware contrast. For evening wear, layer it over a plain black slip dress so the harness blends into the fabric and the silver hardware does the talking. A high-waisted wide-leg trouser with a cropped tank lets the waist section sit at the natural waist and function almost like a statement belt. For a more casual daily use look, pair with an oversized crew-neck sweatshirt and let just the collar strap and center line show above the neckline.

• Over a nude bodysuit for full harness visibility — the classic festival or night-out approach
• Over a black slip dress for tonal layering with hardware contrast
• Collar visible above a crew-neck top for a subtle, street-style nod

Sizing and Fit Notes

The neck band and waist band are each independently adjustable via buckle closures, making this piece wearable across a range of body proportions. The neck strap fits collar sizes roughly 30-42 cm and the waist section covers approximately 60-90 cm around the torso. The single center strap is fixed length, so the overall harness length suits torsos in the range of 35-50 cm (shoulder base to natural waist). Very short torsos may find the waist section rides above the natural waist, and very long torsos may find it sits below — this is a known trade-off of a fixed center strap design. The piece is not designed to be worn under tight knitwear as the rivets can create surface bumps.

Material and Care

The straps are cut from smooth matte faux leather (PU), which holds its shape well and resists surface scuffs better than genuine leather at this strap width. The hardware — O-rings, rivets, and buckles — is zinc-alloy with a silver-tone plating. Do not machine wash; wipe the straps with a damp cloth and dry flat away from direct heat. Avoid prolonged contact with perfume or alcohol-based sprays directly on the strap surface, as these can lift the PU coating over time. Store flat or loosely rolled, not folded sharply at the rivet points.

• PU faux leather strap body — matte finish, approximately 1 cm wide
• Zinc-alloy silver-tone O-rings, rivets, and adjustable buckles
• Wipe clean with damp cloth; no machine washing or soaking
• Avoid sharp folds at rivet points during storage to prevent cracking