Diamond Lattice Cage Skirt Harness with Studs

The Diamond Lattice Cage Skirt Harness is built from narrow black faux leather straps woven into a repeating diamond grid, with a silver-tone metal stud pressed at every intersection. The flared cage silhouette sits from the waist to mid-thigh, creating a defined bell shape without any solid fabric panel.

Diamond Grid Construction

Each strap crossing is reinforced with a riveted silver-tone stud, keeping the lattice locked in its geometric shape during wear. The top waistband is a single continuous strap with a central O-ring at the front, while the hem floats open — there is no solid bottom edge, so the skirt fans outward freely.

• Approximately 1 cm wide faux leather straps throughout the lattice
• Silver-tone stud hardware at every diamond junction point
• Front-center O-ring on the waistband for layering or attachment
• Open hem with no hem band — cage flares naturally from the waist
• No solid fabric panels — fully open lattice construction

Styling and Occasion

Worn over a high-waisted bodysuit or micro shorts, the cage skirt reads as avant-garde club wear. For a boudoir editorial, pair with a matching black strappy bralette and knee-high boots to keep the geometric lines unbroken. The open lattice also works layered over sheer fabric for a softer contrast. One honest note: because there are no solid panels, the look depends entirely on what you wear beneath it.

• Layer over a fitted black bodysuit for a full-body geometric effect
• Pair with knee-high boots to extend the lattice visual downward
• Style with a sheer midi skirt underneath for a festival-ready contrast

Sizing and Fit

The waistband is adjustable via buckle closure and fits waists from approximately 60 cm to 80 cm. The cage length from waistband to lowest hem point is roughly 40 cm, landing at mid-thigh on a 165 cm height. The flared geometry means the skirt widens at the hem regardless of hip size, but buyers with waists above 82 cm may find the buckle reach limited.

Material and Care

Straps are faux leather (PU) over a flexible backing, which holds shape under repeated bending without cracking in normal indoor use. Hardware is silver-tone zinc alloy. To clean, wipe each strap with a damp cloth and mild soap — do not submerge, do not machine wash, and keep away from direct heat sources that can warp the PU surface. Lay flat to dry. Store hung or rolled, not folded at the stud points, to prevent stud imprints in the strap surface over time.