Errek Göğüs Kemer, Deri Erkek Fantezi Giyim, Şık Deri Kemer

This black faux leather chest harness runs from the shoulders down to the waist with a Y-shaped upper strap that meets a central O-ring at chest level, then fans into three horizontal bands across the torso. The structured layout distributes tension evenly — it stays put during movement rather than riding up like single-strap styles.

Strap Layout and Hardware

The harness features six silver-tone rectangular buckles — two at the shoulder, two at the mid-chest band, and two at the lower waist band — allowing each section to be sized independently. Three silver-tone O-rings (approximately 3 cm diameter) sit at the chest center and on the two lower horizontal bands, adding structural detail without adding significant weight. Strap width is approximately 1.5 cm, wide enough to hold shape but narrow enough to layer cleanly under or over a jacket.

• Three horizontal chest-to-waist bands with individual buckle adjustment
• Y-shaped shoulder strap with single-point chest O-ring connection
• Six silver-tone rectangular buckles, one per strap end
• Three decorative silver O-rings at band junctions
• Strap width approximately 1.5 cm throughout

How to Style for Occasions

Worn directly on bare skin, this harness pairs with slim-cut trousers or dark jeans for a night-out look. Layer it over a sheer black mesh top for a festival outfit that keeps warmth without hiding the hardware. For a more restrained daytime edge, wear it under an open structured blazer so only the shoulder straps and chest O-ring show at the lapels — a combination that reads as fashion-forward rather than costume. The all-black color and clean silver hardware also work over a fitted turtleneck for cooler months.

• Bare chest with dark trousers: direct night-out wear
• Over mesh top: festival or club layering
• Under open blazer: daytime editorial look
• Over turtleneck: autumn or indoor-event styling

Sizing and Fit

The buckles allow chest circumference adjustment roughly between 75 cm and 105 cm and waist adjustment between 65 cm and 95 cm. The Y-strap shoulder length is fixed — wearers with a very long torso (above 90 cm shoulder-to-waist) may find the lower bands sit higher than shown. This is a one-size product; it fits most medium-to-large builds but is not designed to accommodate very slim frames (under 70 cm chest) where the straps may gap. Check your chest and waist measurements against these ranges before ordering.

Material and Care

The straps are cut from smooth black faux leather (PU-coated fabric) with no lining on the strap faces. Hardware is zinc-alloy with silver-tone plating — it will dull over time with frequent friction, which is the main wear point on this piece. To clean, wipe with a damp cloth only; do not submerge in water or machine wash, as prolonged moisture softens the PU coating and weakens the adhesive bond at the strap edges. Store flat or loosely coiled to prevent permanent creasing at the buckle points.

• PU faux leather straps — no animal products
• Zinc-alloy silver-tone hardware, plating subject to wear
• Wipe clean with damp cloth; no machine washing
• Store flat to avoid crease lines at buckle points