Faux Leather Bra Harness with Draping Chains and Studs

This chest harness is built around a structured black faux leather band that cups the bust, secured by a halter-style neck strap and connected at the center with a silver O-ring. The standout detail is the row of silver fringe chains that drape from the lower band, each strand approximately 15 cm long, creating movement with every step. A line of silver metal studs runs along the bottom edge of the band, adding a hardware-forward finish that sets it apart from plain leather bra harnesses.

Chain Drape and Hardware Detail

The silver fringe consists of multiple individual chain strands attached side by side across the full width of the lower band, roughly 25-28 cm total span. The chain links are standard silver-tone metal, and the studs are flat-head silver hardware pressed into the leather band at even intervals of approximately 1.5 cm. A pair of chain links also runs horizontally between the left and right cups, adding a layered, open-chest look.

• Approximately 15 cm silver fringe chain drape from the lower band
• Silver flat-head studs at 1.5 cm intervals along the band
• Central silver O-ring connector at bust midpoint
• Halter neck strap with adjustable back closure
• Horizontal chain detail bridging left and right cups

Styling and Occasion

This bra harness works best as an outer layer rather than alone. For a festival or concert look, wear it over a black mesh crop top with high-waisted wide-leg trousers; the chains catch light and move freely over the fabric. For an evening going-out outfit, layer it over a fitted turtleneck bodysuit and pair with tailored trousers — the studs and silver hardware read as jewelry-level detail. It also layers over a blazer worn open for an editorial street-style combination. Because the chains hang loose, avoid pairing with chunky knit fabrics that can snag individual links.

Sizing and Fit

The halter neck strap is adjustable, and the back closure allows approximately 5 cm of fit adjustment, making it suitable for bust measurements between 80 cm and 95 cm. The band sits at the underbust level; anyone with a torso longer than 45 cm from shoulder to waist may find the chain drape sits slightly higher than expected. This is not a wired or padded piece — it provides silhouette framing rather than support, so it is best worn over another top for everyday use. Sizing is one-size with the noted adjustment range; those outside 80-95 cm bust may find the fit too loose or too tight to achieve the intended look.

Material and Care

The straps and band are made from faux leather (PU-coated fabric), which has a smooth, slightly glossy surface finish. The hardware — O-ring, studs, and fringe chains — is silver-tone metal alloy. PU leather can crack if bent sharply or stored compressed; lay the piece flat or hang it when not in use. Wipe the leather surfaces with a slightly damp cloth and dry immediately; do not submerge in water or machine wash. The chains can be gently straightened if tangled but should not be pulled forcefully at the attachment points.

• Faux leather (PU) band and straps — smooth glossy finish
• Silver-tone metal alloy hardware throughout
• Wipe-clean only — do not machine wash or soak
• Store flat or hanging to prevent PU surface cracking
• Chain links may tangle during storage; untangle gently