Faux Leather Chest Harness with Geometric O-Rings

This black faux leather chest harness uses a double parallel-strap triangle cage construction — two narrow straps run side by side from the center front rivet up to each shoulder, creating a geometric bra-cage frame that sits flat against the chest without bulk. Silver-tone O-rings at each shoulder junction and a single center-front rivet anchor the geometry in place.

Chest Harness Styling Options

Worn over a plain white or black T-shirt, the cage framing reads as a structured accessory layer for a street-style look. Pair it over a sheer mesh top for an evening outfit, or wear it directly over bare skin with high-waisted trousers for a festival wardrobe combination. The slim strap width of approximately 1 cm keeps the silhouette graphic rather than heavy, so it layers cleanly without adding visual weight to the torso.

• Over a fitted turtleneck for a winter layering combination
• Directly over a bodysuit for a sleek, minimal statement
• Layered over a sheer blouse for a contrast-texture party look

Sizing and Chest Fit

The horizontal ribcage band and the shoulder straps are both adjustable via metal buckle closures, giving a fit range suitable for chest circumferences of approximately 70 cm to 100 cm. The triangle cage geometry maintains its shape across that range because the two converging straps meet at a fixed center rivet rather than relying on elastic. Wearers with a chest circumference above 100 cm may find the underband sits higher than intended — check measurements before ordering.

• Adjustable underband fits approximately 70-100 cm chest circumference
• Adjustable shoulder straps accommodate varied torso lengths
• Fixed center-front rivet maintains geometric shape at any adjustment
• Not recommended for chest measurements above 100 cm

Faux Leather Material and Care

The straps are cut from smooth faux leather (PU-coated fabric) with a matte-finish surface that resists surface scratching better than glossy PU alternatives. The silver-tone hardware — O-rings and rivets — is zinc alloy with a brushed finish. Because faux leather does not breathe, extended wear against bare skin in warm conditions may cause minor discomfort; a thin underlayer resolves this. To care for the harness, wipe with a damp cloth only — do not machine wash or submerge in water, as prolonged moisture weakens PU adhesion over time.

• Wipe-clean only with a damp cloth; no machine washing
• Store flat or loosely coiled to prevent strap creasing
• Silver zinc-alloy hardware may tarnish with heavy sweat exposure

Hardware and Construction Detail

Each shoulder-to-center junction uses a small circular O-ring in silver-tone zinc alloy that also functions as the adjustment anchor point. The underband closes with a metal buckle at the back, allowing single-handed adjustment. All strap connections are reinforced with flat rivets rather than stitching alone, which distributes tension evenly when the harness is worn over clothing. The overall weight of the piece is light — under 150 g — making it comfortable to wear for an evening without fatigue.