Piente
Faux Leather Chest Harness with O-Ring Choker
$32.85
Estimated Delivery Date: July 20-22
Color
Please select a color
Size
Please select a size
Discreet Shipping
Plain Packaging
No Content on Invoice
🚚 Discreet packaging — no brand name visible
⚡ Same day dispatch (orders before 2:00 PM)
🔒 256-bit SSL secure checkout
- SKU
- APFT644-S1
- Weight
- 0.200
- Categories
- Womens Belt
Product Details
| Care Instructions | Wipe clean with damp cloth; no machine wash; store flat |
| Lining | No lining; single-layer strap construction |
| Closure | Pin buckles on choker rear and dual waist bands; D-ring side connectors |
| Material | PU faux leather straps with glossy smooth surface |
Related Searches
Frequently Asked Questions
The two waist bands each have their own pin buckle on the right side. Loosen or tighten them independently to position the lower band at your natural waist and the upper band roughly 8 cm above it. The shoulder straps are not adjustable in length, so torso length between 40-50 cm gives the best proportional fit.
The choker panel is approximately 3 cm tall and fastens at the back. It sits on top of fabric rather than directly on skin, so an open collar or v-neck shirt collar worn unfastened works well — as shown in the product image. A high or buttoned collar will bunch under the panel.
PU faux leather can develop edge peeling if repeatedly soaked or stored tightly rolled. The straps here are cut at 1.5 cm width, which reduces stress points compared to thinner straps. Wiping down with a dry cloth after wear and storing flat (not coiled tightly) significantly extends the surface life.
The chest harness uses diagonal shoulder straps and two waist bands — it does not cover the torso between the straps. It is designed to layer over a garment, not as a standalone top. The choker portion sits independently at the neck and can be worn separately if the shoulder connectors are released, though they are attached as one unit.
Product Detail
Black faux leather chest harness with a wide O-ring choker and silver hardware for layered everyday styling.
- ✓Wide black faux leather choker with large front-facing silver O-ring pendant
- ✓Diagonal shoulder straps approximately 1.5 cm wide cross the upper chest
- ✓Double parallel waist bands with individual pin buckles for independent adjustment
- ✓Silver-tone D-ring side connectors sit at hip level on both sides
- ✓Choker fits neck circumferences from 30 cm to 38 cm via rear buckle
- ✓Waist straps extend to roughly 80 cm, fitting up to size XL waist
- ✓Shoulder strap length is fixed — sizing relies on waist and neck adjustment only
This black faux leather chest harness pairs a wide choker panel with a large silver O-ring and a structured chest-and-waist strap system, all in one wearable piece. The shoulder straps cross the collarbone and connect at the sides with D-ring loops, while two parallel waist bands cinch below the ribcage with standard pin buckles.
Chest Strap Configuration
The harness runs from the choker at the neck down to a double waist band, creating three distinct horizontal strap levels across the torso. Strap width is approximately 1.5 cm throughout, keeping the silhouette graphic without adding bulk. Silver D-rings sit at each hip junction, giving the piece its structured, layered look over a white button-down or fitted tee.
- Wide choker panel with large silver O-ring front pendant
- Diagonal shoulder straps crossing the upper chest
- Two parallel waist straps with individual pin buckles
- Silver D-ring side connectors at hip level
- All hardware in uniform silver-tone metal
How to Style for Daily Wear
Worn over a crisp white shirt as shown, the harness acts as a structured belt-and-choker combo — one accessory replacing two. For a cooler-weather outfit, layer it over a fitted mock-neck top and straight trousers; the dual waist bands define the waist without needing a separate belt. Festival and evening looks work well too: pair with a solid bodysuit and wide-leg trousers for a graphic contrast between the black straps and a light base. Note that the rigid choker panel sits about 3 cm tall, so it works best with open necklines or shirt collars worn open.
- Over a white button-down shirt for an editorial day look
- Over a fitted bodysuit with wide-leg trousers for evening
Sizing and Fit
The choker adjusts via a small rear buckle and fits neck circumferences from approximately 30 cm to 38 cm. The waist straps extend to roughly 80 cm at the longest setting, fitting waists up to about size L-XL. If your torso is longer than average, the vertical distance between choker and waist band may feel shorter; the piece is proportioned for a torso length of 40-50 cm (shoulder to natural waist). The shoulder straps are fixed in length and are not individually adjustable, so sizing is primarily determined by waist circumference rather than bust.
Material and Care
The straps are cut from smooth black faux leather (PU-coated fabric), giving a glossy finish that photographs as deep black rather than matte. Hardware is zinc-alloy with silver-tone plating. The material does not stretch, so the adjustable buckles are essential for fit. Wipe clean with a damp cloth — do not submerge in water or machine wash, as soaking will cause the PU coating to peel at edges over time. Store flat or loosely coiled to prevent crease marks in the strap surface.
- PU faux leather straps — no animal products
- Zinc-alloy silver-tone hardware
- Wipe clean only; avoid prolonged moisture
- Store flat to prevent permanent strap creasing
WHAT OTHER PRODUCTS ARE AVAıLABLE in OUR OTHER CATEGORIES?
Faux Leather Chest Harness with O-Ring Choker
$32.85
