Faux Leather Full Body Harness with O-Ring & Chains

This black faux leather full body harness combines a structured chest band, collar, waist belt, and thigh cuffs into one coordinated set connected by delicate silver-tone chains. The O-ring hardware at every junction point adds industrial contrast to the smooth faux leather panels, setting it apart from single-strap styles.

Adjustable Strap Fit

Every band in this set — collar, chest, waist, wrist, and thigh — features individual buckle closures so you can dial in the fit independently. The adjustable range suits most body types without altering the design.

• Collar band adjusts from approximately 30 cm to 42 cm in circumference
• Chest panel straps extend up to roughly 90 cm around the torso
• Waist belt fits from 60 cm to 85 cm
• Thigh cuffs accommodate thighs from 45 cm to 60 cm
• All buckles use a single-prong closure for quick adjustments

Silver Chain Detail

Two fine silver-tone chains drape from the chest panel across the front, lending a layered jewelry effect without adding bulk. The chains are decorative rather than structural, so they move freely and catch light as you move — a detail that reads well under both warm indoor lighting and flash photography.

• Double chain drops span approximately 20 cm across the chest opening
• Chain links are fine-gauge, roughly 3 mm wide, for a delicate look
• Silver-tone finish on all O-rings, chains, and buckle hardware
• Trade-off: decorative chains are not load-bearing and should not be pulled with force

Styling & Occasion

The most straightforward combination is over a sheer black bodysuit or a fitted turtleneck for a layered going-out look where the harness sits on top as the focal piece. For a more minimal approach, wear the chest and waist bands over a cropped white T-shirt with wide-leg trousers — the black-on-white contrast keeps the hardware visible without going full edge. The thigh cuffs can be worn alone with a short skirt when you want to reference the set without the full body configuration.

Material & Care

All straps are cut from smooth black faux leather (PU-coated fabric) with a subtle gloss finish visible in light. There is no textile lining — the inner surface is the reverse side of the PU material, which is soft enough for short-term wear but may cause friction on bare skin during extended use. Wipe clean with a damp cloth; do not machine wash or submerge in water, as prolonged moisture degrades the PU coating. Store flat or loosely rolled to prevent permanent crease marks in the straps.