Faux Leather Shoulder Harness with Detachable Skirt

This black faux leather shoulder harness pairs structured wing-shaped shoulder panels with a two-piece detachable wrap skirt, creating a complete avant-garde set in one product. The matte faux leather panels have a smooth, rigid texture that holds their shape without stiffeners, and the skirt panels flare away from the hip at roughly 30 cm across each side.

Shoulder Panel Construction

Each shoulder features a curved wing panel riveted to the main harness strap with silver-tone metal rivets. The panel width spans approximately 20 cm at the widest point, providing a sculptural shoulder silhouette that differs from flat-strap harnesses. The chest strap runs horizontally at bust level and fastens with a silver pin-buckle at center front, allowing 10 cm of length adjustment.

• Structured wing shoulder panels riveted with silver-tone hardware, approximately 20 cm wide
• Horizontal chest strap with center-front pin-buckle, adjustable across 10 cm range
• Matte black faux leather with rigid hold — no interior stiffeners required
• Smooth texture on outer face; lightly padded on inner shoulder contact points

Detachable Skirt Fit

The skirt component wraps around the hips via its own independent belt strap, so it can be worn with the harness top or removed entirely and styled over trousers. The belt adjusts from approximately 60 cm to 100 cm hip circumference, fitting XS through L in most standard sizing. Two symmetrical panels — each roughly 25 cm long — hang from the belt and leave the back open, so body-conscious fits underneath work best. Note that very full hip measurements above 105 cm may find the wrap panels do not overlap fully at front.

• Independent hip belt adjusts 60-100 cm for standalone or combined wear
• Two front wrap panels, each approximately 25 cm long, open back design
• Attaches and detaches via the same silver pin-buckle system as the harness
• Best worn over fitted bodysuits, high-waist briefs, or slim trousers
• Hip measurements above 105 cm may leave a visible front gap between panels

Styling for Everyday and Festival Occasions

Worn as a full set, the harness-plus-skirt layered over a black mesh bodysuit and ankle boots works as a festival or club outfit that reads as editorial rather than costume. For a daily use look, detach the skirt and wear just the shoulder harness over a fitted turtleneck — the wing panels add structure to an otherwise minimal top. A third option: wear only the skirt belt over wide-leg trousers with a tucked blouse for an accessory-forward daytime outfit.

Material and Care

Both pieces use matte vegan leather (PU-coated fabric) on the outer face and a thin woven lining on skin-contact areas. The rivets and buckles are zinc-alloy with silver-tone plating. Do not machine wash — wipe the outer surface with a damp cloth and mild soap, then air-dry flat. Avoid prolonged exposure to direct sunlight, which can fade the matte black finish over time. The hardware is corrosion-resistant under normal indoor conditions.