Fringe Faux Leather Halter Top & Skirt Set

This two-piece set pairs a choker-collar halter top covered in dense vertical faux leather fringe strips with a matching high-waist mini skirt built on the same fringe construction. Every strip runs floor-length on the skirt and chest-length on the top, creating continuous movement with each step. The waist is anchored by a solid faux leather belt band with silver stud hardware that separates the top and skirt cleanly.

Fringe Coverage and Silhouette

The halter top begins at a structured choker band — approximately 2 cm wide — and cascades dozens of individual faux leather strips downward, covering the chest and leaving the back fully open. The skirt sits at the natural waist on the belt band and reaches roughly mid-thigh, with the fringe extending a few centimeters below the hem for an uneven, layered finish. Because the coverage depends entirely on fringe density rather than solid panels, the silhouette shifts noticeably when moving.

• Choker collar band: approx. 2 cm width with a single silver stud accent
• Fringe strip width: approx. 0.5 cm each, cut from flat faux leather sheets
• Skirt hem landing: mid-thigh, roughly 40-45 cm from waist
• Back exposure: halter ties at neck only, full open back
• Belt waist band: approx. 3 cm wide with adjustable buckle closure

Styling and Occasion

The set works best as a statement piece for club nights, costume events, bachelorette parties, or themed photo shoots. For a wearable club look, layer over a seamless black bodysuit or high-cut briefs so the fringe hangs freely without bunching. For a festival outfit, pair the top alone over high-waisted vinyl trousers and chunky platform boots. Keep accessories minimal — a single cuff bracelet and pointed-toe heels balance the density of the fringe without competing with the movement. Note that this set is not suited for cold outdoor venues without a substantial outerwear layer given the open-back construction.

Sizing and Fit

The belt band offers the most reliable sizing reference: it adjusts to fit waists from approximately 60 cm to 80 cm. The choker collar is semi-rigid and fits neck circumferences between roughly 32 cm and 38 cm; people with larger necks may find the fit uncomfortably snug. Because the top is fringe-only with no structured cup or underwire, it provides minimal shape support and suits those comfortable with a low-coverage aesthetic. The skirt length at mid-thigh is best suited to heights between 160 cm and 175 cm — taller wearers will find the hem rises above mid-thigh.

• Waist adjustment range: approx. 60-80 cm via belt buckle
• Collar fit: approx. 32-38 cm neck circumference
• Ideal height range: 160-175 cm for mid-thigh hem placement
• Cup support: none — fringe-only top, no underwire or boning
• Back style: fully open halter; not suitable as standalone outerwear in cold conditions

Material and Care

Both pieces are cut from smooth matte faux leather — a synthetic PU-coated fabric that mimics the surface of leather without animal products. The fringe strips are laser- or die-cut directly from the sheet, leaving clean edges that resist fraying under normal wear. The hardware studs are silver-tone zinc alloy. To maintain the strip alignment, hang the set vertically after wear rather than folding; folding can crease the strips and flatten the cascade effect. Wipe clean with a damp cloth only — do not submerge in water, do not machine wash, and keep away from prolonged direct sunlight to prevent the PU coating from cracking over time.