Fringe & Studded Faux Leather Body Harness Set

This three-piece black faux leather set pairs a cut-fringe bra panel with silver stud trim, a choker with front O-ring, and a full thigh garter harness — all in matte black vegan leather with silver-tone hardware. The fringe strips on the bra chest piece are individually cut from the same faux leather, creating movement without any added fabric.

Fringe Bra Construction

The chest harness bra features a triangular strap frame with an adjustable center O-ring at the sternum. Silver dome studs run along the upper strap edges, spaced approximately 2 cm apart. Narrow shoulder straps connect to the frame via rectangular sliders, and the fringed lower panel hangs freely from the strap base — typically 10-14 cm in fringe length depending on size.

• Individually cut fringe strips, approx. 1 cm wide, no stitched hem
• Silver dome stud trim along chest straps, about 2 cm spacing
• Center front O-ring, approx. 3 cm diameter, silver-tone metal
• Adjustable shoulder straps with rectangular slide hardware

Garter Thigh Harness

The lower piece is a two-leg garter harness that sits at the hip and wraps around each upper thigh. Wide waist straps — approximately 2 cm — buckle at the sides, and each thigh loop closes with a silver stud-detail snap. The thigh bands sit at the widest point, typically fitting thigh circumferences of 48-62 cm. Note: the harness is sized for slim-to-medium thigh measurements; fuller thigh fits may need extension hardware.

• Waist band width approx. 2 cm, adjustable side buckles
• Thigh loop fits approx. 48-62 cm circumference
• Side O-rings on each thigh loop, 3 cm diameter
• Stud-detail snap closures on thigh bands

Styling for Everyday and Night Wear

Worn over a fitted black bodysuit, the fringe bra becomes a layered festival look. For a night-out combination, pair the chest harness over a semi-sheer black blouse — the silver studs catch low light without added jewelry. The garter harness works over opaque tights for a structured editorial effect, or worn directly as lingerie for an intimate occasion. Keep the rest of the outfit minimal: plain black trousers or a pencil skirt let the fringe and hardware carry the visual weight.

Sizing and Fit Notes

The set is designed for a bust range of approximately 75A-85B (EU sizing) and hip circumference of 80-95 cm. The chest straps adjust via slide hardware, so there is no fixed cup support — the bra frame sits against the chest rather than lifting. For a 90C or larger, the fringe panel will likely sit wider than intended. The choker fits neck circumferences of 30-38 cm and closes with a snap. Measure your thigh before ordering: at the widest point it should fall between 48 and 62 cm for a secure fit.

Material and Care

All straps and panels are cut from matte-finish PU faux leather — soft-hand polyurethane coated fabric that resists minor scuffs. Hardware is silver-tone zinc alloy. The fringe does not fray further once cut, but sharp edges should be avoided to prevent tearing. Hand wash in cold water only, lay flat to dry away from direct heat. Do not machine wash or tumble dry — the PU coating may crack under heat. Light spot-cleaning with a damp cloth handles most surface marks.