Full Body Chest Harness with Brass O-Rings

This black full body chest harness wraps the upper torso in a geometric grid of flat vegan leather straps anchored by antique brass O-rings and dome rivets — a structured silhouette that stands apart from single-band or chain styles. The strap network covers the shoulders, chest, and waist in three connected horizontal bands, giving a defined body-frame effect without bulk.

Brass Hardware Details

Every junction on this harness uses an antique brass dome rivet to fix the strap crossings, while the three brass O-rings — placed at the center chest and center waist — act as anchor points that distribute tension evenly across the body. The warm brass finish contrasts sharply against the matte black vegan leather, making the hardware visible as a design element rather than a hidden fastening.

• Antique brass dome rivets at every strap crossing for a uniform, grid-like pattern
• Three O-rings positioned at mid-chest and waist for symmetrical tension
• Brass hardware finish resists tarnishing with regular dry storage
• Hardware sits flush against the skin — no sharp edges on the rivet backs

How to Style for Occasion

Wear this harness over a plain white fitted t-shirt for a layered festival outfit, or directly over bare skin paired with high-waist trousers or tailored shorts for a stage-ready look. For colder settings, layer it over a sheer mesh long-sleeve top — the geometric strap grid remains visible through lightweight fabrics. It also works under an open blazer, where only the chest and shoulder straps are framed by the jacket lapels.

• Over bare skin with wide-leg trousers: minimal layered festival style
• Over sheer mesh top: adds depth while keeping the strap pattern readable
• Under an open blazer: shoulder frame effect with concealed waist bands
• Paired with black shorts: monochrome body-positive stage look

Sizing and Fit

The adjustable buckle at the back allows a chest fit range of approximately 80 cm to 110 cm. The shoulder straps are fixed-length and sit best on torso heights between 165 cm and 190 cm — taller wearers will find the waist band lands higher, while shorter wearers may need to adjust the bottom band position. The straps are approximately 1.5 cm wide, which creates visible definition without digging into skin during short wear. This harness is sized for average adult male proportions; very broad shoulders above 52 cm shoulder-width may feel the shoulder straps pull outward.

Material and Care

The straps are cut from flat faux leather (PU-coated fabric backing) — flexible enough to follow the body's contours without cracking at the bend points during typical wear sessions. There is no lining on the strap interior; the smooth PU surface contacts the skin directly. To clean, wipe with a damp cloth and mild soap, then air dry flat — do not machine wash, do not tumble dry, and avoid prolonged exposure to direct sunlight, which can fade the matte black finish over time.

• Faux leather PU strap material: flexible, non-cracking at standard bend angles
• Strap width approximately 1.5 cm — visible definition without pressure discomfort
• Clean with damp cloth only; machine washing will delaminate the PU coating
• Store flat or loosely coiled to avoid permanent crease marks in straps