Full Body Faux Leather Harness with Intersecting O-Rings

This black faux leather full body harness spans from shoulder to mid-thigh, creating a geometric cage pattern with horizontal, vertical, and diagonal straps connected at every junction by a silver O-ring. Unlike a simple chest harness, this piece layers three zones — chest, torso, and thigh bands — into one wearable structure that holds its shape whether worn over a bodysuit, layered under a blazer, or styled with high-waisted shorts.

Strap Layout and O-Ring Detail

The harness runs two shoulder straps down to a structured chest panel featuring four horizontal bands and two crossing diagonal straps. A central waist O-ring anchors the torso section, while four additional silver O-rings mark the rib and hip junctions. Below the waist, two thigh bands wrap each leg to mid-thigh, keeping the lower section in place during movement. The O-rings are approximately 2 cm in diameter, smooth-edged, and finished in silver-tone metal.

• Two padded shoulder straps, approximately 1.5 cm wide
• Four chest horizontal bands with silver stud adjusters at sides
• One large center waist O-ring plus four smaller junction rings
• Dual thigh bands per leg, positioned at upper and mid-thigh
• All strap intersections reinforced with silver-tone rivets

How to Style This Harness

The geometric grid reads boldly against white or cream base layers — pair over a fitted white bodysuit and leggings for a high-contrast editorial look, or layer under an open-front trench coat for a streetwear edge. For festival styling, wear directly over bare skin with high-waisted vinyl shorts; the thigh bands anchor the piece without additional belting. The all-black strapping also works as an overlay on a little black dress, adding structural interest without color conflict.

• Over a white bodysuit and leggings for graphic monochrome contrast
• Under an oversized blazer with the chest harness visible at the neckline
• With high-waisted shorts for a festival or night-out look
• Layered on a slip dress to add dimension to minimal silhouettes

Sizing and Fit Notes

The harness adjusts at both the shoulder straps and the side torso buckles, accommodating a chest circumference of roughly 80 cm to 110 cm and a waist range of approximately 65 cm to 100 cm. The thigh bands stretch to fit upper thigh circumferences up to about 65 cm. Buyers with a thigh measurement above 65 cm may find the lower bands snug — this is a genuine fit limitation to consider before purchasing. The piece is designed to sit flat against the skin or a thin base layer; bulkier knitwear will push the straps outward and alter the geometric look.

Material and Care

The straps are cut from faux leather (PU-coated fabric), giving the look of leather without animal-derived materials. The hardware — O-rings, rivets, and side adjusters — is silver-tone zinc alloy, which resists light tarnishing but should be kept away from prolonged moisture exposure. To clean, wipe the strap surfaces with a damp cloth and mild soap; do not submerge in water or machine wash. Store flat or hanging to prevent permanent creasing in the PU coating. Avoid contact with oil-based products, which can degrade the faux leather surface over time.