Full Body Harness with Black Metal Rings

This black faux leather full body harness combines a geometric chest cage with three stacked hip bands connected by silver-tone O-ring chains, creating two distinct sections that work together as one piece. The upper harness features diagonal cross-straps meeting at a central O-ring at the sternum, while the lower waist section uses three parallel horizontal bands linked at the sides with short silver chains and riveted O-rings — a construction detail not found on single-zone harness styles.

Chest and Hip Strap Configuration

The upper section spans from the shoulders down to just below the bust line, using four diagonal straps that converge at the chest O-ring and spread out to shoulder loops. A horizontal band beneath the bust anchors the upper section to the waist. The lower section starts at the natural waist with three stacked horizontal bands, each roughly 1.2 cm wide, running around the hips and joining at side O-rings with dangling chain links. A narrow center strap runs vertically down from the waist band through the hip section.

• Upper chest cage with 4 diagonal straps meeting at central sternum O-ring
• Under-bust horizontal anchor band with front center O-ring connector
• Three stacked hip bands, each approximately 1.2 cm wide
• Silver-tone chain links at each hip connecting the stacked bands via O-rings
• Vertical center strap through lower section for structural stability

Sizing and Fit Details

The harness is designed with 8 or more individual buckle adjustment points across the shoulder loops, side bands, and waist straps, allowing the piece to fit chest measurements roughly between 75 cm and 100 cm and hip measurements between 80 cm and 105 cm. The straps do not stretch, so wearers at the upper end of those ranges should size up or use the loosest buckle setting. The lower hip bands sit best on a mid-hip to high-hip position rather than low on the pelvis — positioning them low can cause the chains to pull sideways.

• Chest range approximately 75 cm to 100 cm via shoulder and side buckles
• Hip band range approximately 80 cm to 105 cm via waist and hip buckles
• Non-stretch straps — measure before ordering if between sizes
• Best worn at mid-hip to high-hip level for chain alignment
• Not recommended for chest measurements above 105 cm as strap tension increases significantly

Faux Leather Material and Care

The straps are cut from smooth black faux leather (PU-coated fabric backing), giving a firm, slightly stiff feel that holds its shape over repeated wear. The hardware — O-rings, chains, buckles, and rivets — is silver-tone metal. Faux leather should not be machine washed; wipe clean with a damp cloth and mild soap, then air dry flat away from direct heat. Avoid folding the straps sharply at the rivet points, as the PU coating can crack over time at stress points if stored incorrectly. Hang or store flat.

Styling and Occasion Ideas

Worn over a plain black bodysuit, the chest cage section reads as a structured layering accessory for evening or festival wear. For a daily-use edge look, the upper harness pairs well over a fitted white turtleneck — the black straps contrast sharply. The lower hip section can sit outside high-waist trousers to frame the waist without adding bulk. This harness also works as an outer layer over a midi dress for a contrast-strap editorial look. Both the chain hip detail and the sternum O-ring catch ambient light at night events without needing additional jewelry at the waist.