Full Body Harness with Neck Collar and Thigh Straps

This black faux leather full body harness covers four zones at once: a fitted neck collar, an X-cross chest frame, a mid-waist band, and a pair of upper-thigh cuffs — all connected by approximately 2 cm wide flat straps and fastened with polished gold-tone O-ring connectors at every junction. Unlike single-zone harnesses, the continuous vertical spine strap ties every section into one cohesive silhouette.

Chest and Collar Construction

The collar sits snugly at the base of the neck and feeds into two shoulder straps that split across the chest, crossing at a central O-ring before looping under the bust. A secondary horizontal band at the sternum anchors the cross and keeps the shape flat against the body without sliding.

• Neck collar width approximately 3 cm, sits at base of throat
• Dual shoulder straps angle outward before crossing at mid-chest O-ring
• Under-bust horizontal band prevents upward drift during movement
• Gold-tone O-rings at collar drop and chest junction — not silver or chrome
• Chest section fits bust circumference roughly 80–120 cm with buckle adjustment

Waist and Thigh Fit

Below the chest, a waist frame with two lateral O-rings at the hips transitions into thigh cuffs that wrap the upper leg. The thigh bands are independent loops — they sit 5–8 cm below the hip crease and do not connect behind the knee, so they stay visible whether layered over leggings or worn directly on bare skin. This four-point coverage is what separates this piece from a basic chest harness. A trade-off: the thigh cuffs require careful sizing — if your thigh circumference exceeds roughly 70 cm, the strap may feel tight at the current hole positions.

• Waist band adjustable from approximately 65–95 cm
• Hip O-rings spaced to frame the natural waist curve
• Upper-thigh cuffs, each approximately 2 cm wide, sit above mid-thigh
• Cuffs adjust via stud-post buckles, not sliders — more secure but fewer micro-adjustments

Layering and Occasion Styling

The black-on-white contrast shown in the product image demonstrates the most direct styling approach: pair over a white or neutral bodysuit for a graphic, editorial look suitable for festival wear, concept shoots, or stage costumes. For everyday layering, wear over a fitted black turtleneck — the harness becomes structural detail rather than focal point. A third option: layer over a sheer mesh top for a night-out outfit where the strap geometry reads through the fabric. The neck collar is high enough to function as a statement choker on its own without the rest of the harness visible.

Material and Care

Straps are constructed from faux leather (PU-coated fabric) — matte black finish, firm enough to hold its shape across all four sections without buckling. Hardware is gold-tone zinc alloy O-rings and stud-post buckles. Because faux leather does not breathe, extended wear in warm conditions may cause light perspiration at strap contact points — this is a standard property of PU material, not a defect.

• Outer strap: PU faux leather, matte black finish
• Inner facing: thin fabric backing reduces direct skin friction
• Closure: stud-post buckles at collar, chest, waist, and each thigh cuff
• Care: wipe clean with a damp cloth — do not machine wash or submerge
• Hardware: gold-tone zinc alloy, tarnish-resistant under normal indoor use