Full Body Harness with Wide Waist Belt and Collar

This black faux leather full body harness connects a structured wide collar to a double-buckle waist belt and wide leg cuffs through a network of slim shoulder and leg straps — creating a continuous silhouette from neck to thigh. Every strap runs through silver-tone rectangular buckles, so the fit can be dialed in at multiple points without tools.

Collar, Belt and Cuff Construction

The collar sits at approximately 3 cm wide and closes with a single pin buckle at the front center, giving a clean, flat profile against the neck. Below, twin shoulder straps descend and connect to the waist section via silver D-rings. The waist belt measures roughly 8 cm in height with two horizontal buckles across the front, stiffened enough to hold its shape without boning. Two vertical straps drop from the belt and terminate in wide leg cuffs — each approximately 5 cm wide — secured with their own individual buckles.

• Collar width: approximately 3 cm, single front pin-buckle closure
• Waist belt height: approximately 8 cm with dual front buckles
• Leg cuff width: approximately 5 cm per cuff, individual buckle each
• All hardware: silver-tone rectangular buckles and D-rings
• Adjustable points on shoulder straps, leg straps, collar, belt, and cuffs

Sizing and Fit Notes

Because every major strap adjusts independently, the harness accommodates a broad waist range — roughly 60 cm to 90 cm — and leg circumferences from about 45 cm to 65 cm at the thigh. The collar has a usable size range of approximately 32 cm to 42 cm neck circumference. If you have a neck circumference above 42 cm or a thigh circumference above 65 cm, the straps may reach their limit; check measurements before ordering. The wide belt sits at the natural waist or just below it, depending on torso length.

• Waist range: approximately 60-90 cm adjustable
• Thigh range: approximately 45-65 cm per leg cuff
• Neck range: approximately 32-42 cm collar circumference
• Recommended for XS to L standard sizing
• Not recommended for neck circumferences above 42 cm

Material and Care

The straps and panels are cut from smooth faux leather (PU-coated fabric), which gives the deep black finish and slight sheen visible in the image. The material is firm enough to hold the belt shape but flexible enough not to crease sharply at strap curves. Because the surface is PU, it wipes clean with a damp cloth; avoid submerging in water or machine washing, as prolonged moisture can delaminate the PU coating. Store flat or loosely rolled — never fold the belt section sharply over a hanger, as a permanent crease can set in the structured panel.

Styling and Occasion

Worn over a fitted black turtleneck and wide-leg trousers, the harness reads as a structured accessory rather than lingerie, which works for evening events or editorial shoots. For a contrast look, layer it over a white crisp shirt — the collar and waist belt become the focal point against a pale base. The leg cuffs are visible over cropped trousers or thigh-high boots, adding a layered texture without requiring a full outfit change. The all-silver hardware keeps the palette clean and pairs easily with silver rings, chains, or earrings rather than competing with gold accessories.