Glossy Faux Leather Chest Harness with Silver Rivets

This chest harness is built from glossy patent faux leather straps approximately 1.5 cm wide, cut into a multi-strap cage that spans from the shoulders down to the waist. Two silver O-rings — one at the chest center and one at the waist band — anchor the strap geometry, while rows of silver dome rivets reinforce every junction point. The result is a structured silhouette that holds its shape on the body without pinching.

Chest Harness Styling Occasions

Worn over a fitted white button-down shirt, the burgundy straps create a sharp contrast that reads as editorial rather than costume. For a festival look, layer it directly over a ribbed black crop top and high-waist wide-leg trousers — the waist O-ring draws the eye to the narrowest point. The harness also works under an open blazer, letting the chest straps peek through as a textural accent. Because the straps sit flat against the torso, they do not disrupt structured outerwear.

• Layer over a button-down for a polished editorial look
• Wear above a crop top at festivals or evening events
• Pair with an open blazer for a fashion-forward office aesthetic
• Style over a bodysuit for a monochrome burgundy-and-black set

Adjustable Fit and Sizing

The shoulder and chest straps connect via metal buckles at the back, allowing the harness to fit bust circumferences from approximately 60 cm to 90 cm. The waist band adjusts independently, accommodating waist measurements from roughly 55 cm to 80 cm. Wearers with a broader shoulder span above 45 cm may find the shoulder straps sit closer to the neckline; in that case, loosening the back buckle by one notch corrects the positioning. The harness is not recommended for bust sizes above a 95 cm circumference, as the horizontal strap spacing narrows significantly.

• Chest strap adjustable range: approximately 60-90 cm
• Waist band adjustable range: approximately 55-80 cm
• Shoulder straps fixed at the neckline junction — adjust via back buckle
• Not recommended for bust circumference above 95 cm

Faux Leather Material and Care

The straps are made from PU faux leather with a high-gloss patent finish, giving the burgundy color a saturated, mirror-like depth. The rivets and O-rings are zinc-alloy with a silver-tone plating. PU faux leather should not be submerged in water — wipe the straps with a slightly damp cloth and dry immediately. Store flat or loosely coiled to prevent crease marks in the patent surface. Avoid prolonged contact with pale fabrics, as the deep burgundy dye can transfer under friction. Hardware is not tarnish-resistant; keep away from moisture to maintain the silver finish.

Hardware Detail and Construction

Every strap junction uses a double-cap dome rivet rather than stitching alone, which prevents the PU layer from peeling at high-stress points. The O-rings measure approximately 3 cm inner diameter, large enough to thread a chain or additional accessory through for a customized styling option. Total strap count across the chest and waist sections is eight, creating a geometric cage pattern visible from both front and back.