Kırmızı Kadın Kemer Harness Detaylı Deri Vücut Aksesuarı

This red faux leather waist belt harness combines a wide 5 cm waist belt with two slim adjustable shoulder straps, all connected by silver-tone carabiner clasps and D-rings. The structured waist section sits flat against the body, while the shoulder straps run straight over the shoulders without crossing at the back — a cleaner silhouette than a full-body cage harness.

Shoulder Strap Configuration

Each shoulder strap is approximately 2 cm wide and features multiple punched holes for a precise fit adjustment. Silver rectangular buckles sit at mid-strap, letting you raise or lower the straps independently. The carabiner-style clips at the bottom unhook from the waist belt entirely, so you can wear the waist belt alone on lower-waist outfits. The smooth, flat strap surface lies flush against fabric without catching on knits.

• Two independent shoulder straps with individual buckle adjustment
• Carabiner clips allow strap detachment for waist-only styling
• Strap width approximately 2 cm — slimmer than most harness styles
• Multiple punched holes for precise length setting

How to Style This Harness

Worn over a fitted white cotton shirt and straight-leg trousers, the red color reads as a focal accessory without competing with prints. For an evening look, layer it directly over a solid black bodysuit — the wide red waist band functions like a structured corset belt, cinching the waist by visual contrast. It also works over an oversized blazer to break up the bulk. Note: the shoulder straps are not padded, so heavily structured blazers with thick shoulders may reduce the adjustable range by about 3 cm.

• Over a white shirt with straight-leg pants for daytime contrast
• Over a black bodysuit as a corset-style waist cincher
• Over an oversized blazer for layered festival or night-out styling

Sizing and Fit Details

The waist belt spans a 60 cm to 90 cm waist circumference based on the punched hole range visible on the belt. The shoulder straps extend to approximately 45 cm from clip to buckle at their longest, suiting torso lengths from roughly 38 cm to 48 cm shoulder-to-waist. Buyers with a waist above 90 cm will find the belt too short; those with a very long torso above 50 cm may find the shoulder straps sit slightly short. The waist belt is a fixed-width 5 cm — it does not taper, so it reads as a statement piece rather than a delicate accent.

• Waist range: approximately 60 cm to 90 cm
• Shoulder strap max length: approximately 45 cm
• Fits torso length roughly 38 cm to 48 cm
• Not suitable for waist sizes above 90 cm

Material and Care

The straps and belt body are made from smooth faux leather (PU-coated fabric) in a matte red finish with no visible grain texture — the surface stays flat and does not crease the way genuine leather does. All hardware is silver-tone zinc alloy: rectangular buckles, D-rings, and carabiner clasps. To clean, wipe with a dry cloth; avoid soaking in water as prolonged moisture can cause the PU coating to peel at the edges over time. Store flat or loosely rolled — do not hang by a single strap under weight, as the buckle holes may stretch slightly with sustained tension.