Lattice Grid Full Body Harness with Choker

The Lattice Grid Full Body Harness forms a structured rectangular cage of black faux leather straps from the chest down to the hip hem, creating bold geometric panels that sit 2–3 cm wide against the torso. Unlike single-strap body harnesses, this piece uses a rigid grid system — vertical and horizontal bands intersect at metal rivets, holding the shape even during movement. The attached multi-strap choker connects directly to the upper chest section, so the entire piece stays aligned without extra adjustment.

Lattice Panel Construction

Each rectangular cell in the grid measures roughly 10–12 cm wide and 8–10 cm tall, giving the harness a cage-dress silhouette when worn over a bodysuit or slip dress. The gold-tone O-ring and rivet hardware at the waist belt serve as both structural anchors and decorative details. The lower hem curves in a scalloped arc rather than a straight line, which softens the geometric look at the hip. One honest trade-off: the rigid grid means the piece sits best on torsos between 60–90 cm bust and 55–85 cm waist; very petite or plus-size frames may find the panel spacing less proportional.

Styling and Occasion

This harness works as a statement layer rather than a standalone garment. Pair it over a white fitted tube dress or white bodysuit with white leggings for high-contrast editorial looks suitable for photo shoots, themed events, or avant-garde fashion nights. For a more wearable everyday approach, layer it over a fitted black turtleneck and wide-leg trousers — the black-on-black tones the grid down to a textural accent rather than a full visual statement.

• White bodysuit + white leggings underneath for maximum grid contrast
• Black turtleneck + black trousers for a tonal, fashion-forward everyday outfit
• Mini slip dress underneath for a festival or editorial look

Sizing and Fit

The harness adjusts at the waist belt and shoulder straps to fit a range of body types. The adjustable waist strap covers approximately 60–90 cm circumference, while the shoulder-to-waist panel length suits torsos of roughly 40–50 cm from shoulder to natural waist. The choker adjusts to fit neck circumferences of 30–42 cm. The structured grid does not stretch, so the fit is shaped rather than contoured — it rests on the body rather than compressing it. Those with torso lengths outside the 40–50 cm range may find the waist belt rides higher or lower than intended.

• Waist belt adjustable range: approximately 60–90 cm
• Choker adjustable range: approximately 30–42 cm
• Best fit: torso length 40–50 cm shoulder to waist
• Not recommended for bust measurements above 95 cm due to grid panel spacing

Faux Leather Material and Care

The straps are cut from smooth-surface faux leather (PU coated fabric), which gives the grid a clean matte-to-semi-gloss finish under light. The material is vegan — no animal-derived components. Hardware is zinc alloy with a gold-tone finish; avoid prolonged contact with water to prevent tarnishing. To clean, wipe straps with a slightly damp cloth and dry immediately. Do not machine wash, submerge, or tumble dry — the PU coating will crack with repeated heat exposure. Store flat or hanging to prevent the rectangular grid from warping at the rivet points.

• Wipe clean with damp cloth only — no machine washing
• Dry immediately after any moisture contact
• Store flat or hanging to preserve grid shape
• Hardware: zinc alloy, gold-tone — keep dry to prevent tarnish