O-Ring Faux Leather Chest Harness with Studded Straps

This red faux leather chest harness sits across the chest in a multi-strap geometric configuration, secured by two silver-tone O-rings — a smaller ring at the center chest and a larger ring at the lower sternum. The straps measure approximately 1.5 cm wide and are studded with evenly spaced silver rivets along their full length.

Strap Layout and Hardware

The harness uses a five-strap fan pattern radiating from the shoulder straps down to the lower O-ring, creating a structured cage effect across the bust. All hardware is silver-tone metal — the O-rings, rivets, and adjustable buckle closures keep a consistent metallic finish throughout.

• Two O-rings: one approx. 3 cm diameter at chest, one approx. 5 cm diameter at lower center
• Five faux leather straps, each approx. 1.5 cm wide, riveted with silver studs
• Adjustable buckle at back for a snug or relaxed fit
• Compatible with bra straps or cami straps underneath

Chest Sizing and Fit

The harness is sized to fit a chest circumference of roughly 75 cm to 95 cm, thanks to the adjustable back buckle. It sits above and across the bust rather than encircling the waist, so it does not replace a bra. Women with a fuller bust above a 95 cm chest may find the strap geometry sits higher than intended — sizing up is not an option as this is a one-size adjustable piece. Wear it over a fitted top or cami so the straps lay flat without bunching.

• Fits chest 75-95 cm with back buckle adjustment
• Sits across the chest, not the waist
• Not a bra replacement — designed to layer over existing tops
• One size; no size-up option available

Styling for Everyday Wear

Worn over a plain black fitted top, the red straps create an immediate color-contrast statement without needing additional accessories. For a concert or night-out look, layer it over a white sheer blouse so the red strap color pops against the translucent fabric. It also works over a longline sports bra for a street-wear feel. Avoid pairing with heavily patterned tops — the geometric strap layout competes visually with busy prints and loses its structured look.

Material and Care

The straps are made from smooth red faux leather (PU-coated fabric), which holds its shape and color without the stiffness of genuine leather. The back hardware uses nickel-free silver-tone metal, which reduces skin irritation on contact points. Wipe clean with a damp cloth only — do not submerge in water or machine wash, as soaking will delaminate the PU coating. Store flat or loosely coiled to prevent permanent crease marks in the straps. With careful storage, the faux leather resists cracking for regular seasonal use.