
Piente
Color
Please select a color
Size
Please select a size
| Care Instructions | Wash inside-out 30C, low tumble dry, do not iron on print |
| Lining | None; single-layer construction |
| Closure | Pull-on, no fastening |
| Material | Cotton-polyester blend jersey fabric, reflective print layer |
Related Searches
Black tank top with a retroreflective PELE 10 front print that lights up under any direct beam.
This black tank top carries a large retroreflective PELE 10 print across the chest, built from thousands of micro glass-bead dots that bounce any direct light source straight back to the viewer. The result is instant high-visibility wherever headlights, a camera flash, or a handheld torch is present — without any batteries, zips, or extra layers.
The front graphic uses a dot-matrix retroreflective ink that sits flush with the fabric surface — no raised edge, no peel risk under normal washing. At arm's length in daylight the print appears a clean white-on-black; under a direct beam it glows a sharp, crisp white across roughly 30 cm of chest width, visible from over 100 m in low-light conditions.
The cut is a standard athletic tank: wide armholes, a round neckline, and a straight hem that sits at the hip. For an everyday casual outfit, pair it with straight-leg joggers and chunky sneakers — the reflective print adds a graphic detail that works as streetwear in daylight. For a night-run or evening sports session, wear it as your outer layer over a base layer in cooler weather so the chest print stays visible. The black base also pairs with track pants or shorts for gym use where a clean, non-distracting look is preferred.
The tank follows a slim-to-regular athletic fit through the chest and tapers slightly at the waist. It is cut for a chest circumference of roughly 88–110 cm, covering standard sizes S through XL. Those with a chest above 110 cm or who prefer a relaxed drape may want to size up. The armhole depth is generous — roughly 20 cm from shoulder seam to underarm seam — which suits broad shoulders without restricting range of motion.
The shell is a cotton-polyester blend — cotton provides the soft hand-feel for skin-contact comfort during activity while the polyester content adds shape retention and reduces shrinkage after washing. The reflective print is applied using a heat-transfer retroreflective film; to preserve the dot-matrix surface, wash inside-out at 30 degrees Celsius, tumble dry on low or air-dry flat. Avoid ironing directly on the print — iron the reverse side only. The black dye is reactive-dyed for colour stability across repeated washes, though slight fading over 40-plus wash cycles is normal.
PELE 10 Reflective Black Tank Top Front Print
$43.35No reviews yet.
You can only review products you have purchased and received.