Püsküllü Deri Ceket Harness, Şık Deri Harness Ceket

This black faux leather chest harness pairs dense shoulder fringe panels with a three-strap adjustable torso cage and a studded waist belt, creating a structured silhouette that reads as outerwear rather than an accessory. The fringe falls approximately 30 cm from each shoulder strap, while silver-tone O-rings and side buckles anchor the chest section securely across the ribcage.

Shoulder Fringe and Strap Layout

Two wide shoulder panels each carry tightly cut fringe strips in matching black faux leather, attached along a horizontal strap that runs across both shoulders. A central chest strap with a silver rectangular buckle connects the shoulder panels at the front, sitting just below the collarbone. Two vertical side straps with adjustable silver pin-buckles flank the torso, and a pair of O-rings at chest level add further hardware detail. The overall structure wraps the upper body without covering the chest fully, making it suitable as a layering piece over a crop top or bodysuit.

• Shoulder fringe panels approximately 30 cm long, cut from matching faux leather strips
• Central chest strap width approximately 2 cm with silver rectangular buckle
• Two side pin-buckle straps for torso fit adjustment
• Four visible silver-tone O-rings across the chest section
• Fringe moves freely, adding motion detail when worn

Studded Waist Belt Detail

The lower section is a dedicated double-layer waist belt studded with small domed rivets and fastened with a gold-tone pin buckle on the front. The studs are spaced evenly across the belt width of approximately 4 cm, giving the waistline a rock-influenced texture distinct from the fringe above. The belt sits at natural waist level and can also be worn separately as a standalone accessory.

• Waist belt width approximately 4 cm, double-layered faux leather
• Domed stud rivets spaced evenly across the full belt length
• Gold-tone front pin buckle with multiple holes for waist adjustment
• Belt detaches from the harness section for separate use

Styling and Festival Occasions

Wear the harness over a black mesh long-sleeve top for a layered festival look, or pair it directly over a plain white fitted tee to let the fringe and hardware contrast against a light background. For an evening out, combine with high-waisted faux leather trousers and ankle boots to build a full tonal-black outfit where the fringe adds the only movement. The studded belt works as a standalone piece over a denim jacket for a daytime rock-inspired look. Note that the open chest panel means a comfortable base layer is needed in colder weather.

Sizing and Fit

The harness adjusts across the torso via two side buckle straps, accommodating a chest circumference of roughly 75 cm to 100 cm. The waist belt adjusts separately, fitting waist measurements from approximately 65 cm to 90 cm. Both sections are sized independently, so wearers with a larger chest but a smaller waist can dial in each section without compromise. The shoulder fringe rests naturally on the upper arm; very broad shoulders may push the fringe forward slightly. This piece is not recommended for chest sizes above approximately 105 cm as the horizontal chest strap will not lie flat.

Material and Care

The straps and belt are cut from smooth-finish black faux leather (PU-coated fabric), chosen for a matte sheen that photographs well under both natural and stage lighting. Hardware is silver-tone zinc alloy on the chest section and gold-tone zinc alloy on the waist belt; both are corrosion-resistant under normal indoor wear but should be kept dry. Wipe clean with a slightly damp cloth and a drop of gentle soap; do not machine wash or submerge. Store flat or hanging to prevent strap kinks. Avoid prolonged direct sunlight, which can cause the PU surface to crack over time.