Red Faux Leather Cage Skirt Harness with O-Ring Grid

This cage skirt harness wraps around the waist and falls to mid-thigh as a diamond-grid overlay of red faux leather straps, each intersection secured by a gold-tone O-ring. Unlike a solid skirt or a single-strap body harness, it sits as a standalone layer you pull on over any base garment — no clasps to fumble with at the waist, just a continuous strap loop that slides on in seconds.

Strap Grid Construction

The skirt is built entirely from flat faux leather straps approximately 1.5 cm wide arranged in a diagonal diamond pattern. Each diamond cell measures roughly 10 cm across at its widest point, and a gold-tone metal O-ring pins every four straps together at each node. The waistband is a single continuous red strap that anchors the entire grid — it sits just above the natural waist and keeps the panel from shifting during wear.

• Approximately 1.5 cm wide flat faux leather straps throughout
• Gold-tone metal O-ring at every grid intersection — no stitching exposed at nodes
• Continuous waistband strap anchors the full diamond grid
• Mid-thigh length from waist to hem, approximately 45 cm drop
• No lining — grid panels are open by design, meant for layering over base garments

Styling and Occasion

The most practical base for this harness skirt is a pair of fitted white or black leggings and a tucked-in sleeveless bodysuit — the open grid frames the base garment rather than covering it. For a night-out combination, pair the red cage panel over a black faux leather mini skirt and ankle boots; the contrast between the red diamond grid and dark underskirt reads as a two-layer editorial look. Because the waistband sits higher than a standard skirt waistline, high-waisted trousers also work as a base if you want the grid to overlap the waistband of the pants for a stacked-layer silhouette.

• Over white or black fitted leggings for a graphic color-block effect
• Over a black mini skirt and ankle boots for evening occasions
• Layered over high-waisted trousers for an editorial fashion editorial silhouette

Sizing and Fit

The harness skirt is sized by waist circumference: the waistband loop is adjustable via a small metal slider buckle that accommodates approximately 65 cm to 95 cm waist. The grid panel hangs freely below the waistband and is not form-fitted — it does not touch the hips or thighs and will not constrict movement. This is an important trade-off to understand: because the grid is open and hangs straight down from the waist, the visual width of the skirt panel does not change with hip size — it suits a range of hip measurements without adjustment.

• Waist range: approximately 65 cm to 95 cm via slider buckle
• Grid panel length (waistband to hem): approximately 45 cm
• Open grid does not touch hips — suitable across hip sizes 85 cm to 115 cm
• Not suitable as sole lower coverage — a base garment underneath is required

Material and Care

The straps are faux leather (PU-coated fabric) — not genuine leather. PU faux leather holds its red color well under normal wear but is sensitive to prolonged sunlight, which can cause surface fading over several months. The O-rings are zinc alloy with a gold-tone electroplated finish; they resist minor moisture but should not be submerged. To clean, wipe each strap individually with a damp cloth and mild soap, then air dry flat — do not machine wash, do not tumble dry, and avoid folding the straps tightly during storage to prevent permanent creasing of the PU surface.

• Straps: PU faux leather over fabric base — not genuine animal leather
• Hardware: zinc alloy with gold-tone electroplating
• Clean with damp cloth and mild soap only; air dry flat
• Store laid flat or hung — avoid tight folding to prevent strap creasing
• Keep out of direct sunlight for extended periods to preserve red pigment