Piente
Red Faux Leather Underbust Harness with Stacked O-Ring Front
$28.35
Estimated Delivery Date: July 21-23
Color
Please select a color
Size
Please select a size
Discreet Shipping
Plain Packaging
No Content on Invoice
🚚 Discreet packaging — no brand name visible
⚡ Same day dispatch (orders before 2:00 PM)
🔒 256-bit SSL secure checkout
- SKU
- APFT976-AI-NB-V1-K1
- Weight
- 0.200
- Categories
- Womens Belt
Product Details
| Care Instructions | Wipe clean with damp cloth; no machine washing; store flat |
| Lining | Fabric-backed inner surface for skin comfort |
| Closure | Silver-tone side buckle adjusters on band and shoulder straps |
| Material | Smooth red PU faux leather outer layer |
Related Searches
Frequently Asked Questions
The side buckles adjust the band from approximately 65 cm to 95 cm underbust circumference. If your underbust is above 100 cm, the band may not close fully at the current adjustment range.
There are five silver-tone O-rings stacked vertically along the center front strap. They are individually linked and move slightly, but are not designed to be detached or removed.
The fabric-backed inner layer sits comfortably over thin tops like bodysuits, mesh, or ribbed knits. The 6 cm band may shift if worn over thick or textured fabric like cable knit.
No — it is PU faux leather, a synthetic PU-coated fabric. It has the smooth structured look of leather but is lighter, animal-free, and requires different care (wipe clean only, no soaking).
PU faux leather can show surface cracking over time if stored in sharp folds or exposed to prolonged moisture. Keeping the wide band stored flat and wiping it dry after wear helps maintain the finish.
Product Detail
Bright red faux leather underbust harness with five stacked silver O-rings at center front and adjustable shoulder straps.
- ✓Wide underbust band approx. 6 cm tall for structured waist framing
- ✓Five individually linked silver O-rings stacked vertically at center front
- ✓Underbust circumference adjusts from approx. 65 cm to 95 cm via side buckles
- ✓Shoulder straps approx. 1.5 cm wide with independent length adjustment
- ✓Silver-tone flat-head rivet studs at all strap junction points
- ✓Smooth red PU faux leather outer with fabric-backed inner layer
- ✓Not suitable for underbust measurements above 100 cm — adjustment range is fixed
This red faux leather underbust harness is built around a wide underbust band (approx. 6 cm tall) and a central column of five silver O-rings stacked vertically from band to chest. Two shoulder straps arch up from the back of the band, converge at a triangular top ring, and connect to the O-ring column — creating a clean, structured silhouette without excessive hardware.
Styling & Occasion Options
Wear it over a fitted white or black bodysuit for a festival or club night: the red pops against neutral base layers. For everyday use, layer it over a simple crew-neck tee — the underbust band cinches the waist visually while the shoulder lines stay flat under an open blazer. It also sits flat enough under a sheer blouse for a more subtle look.
- Festival layering over bodysuit or crop top
- Club styling over mesh or ribbed tops
- Office-edge look under an open blazer
- Sheer-blouse layering for low-key wear
Sizing & Fit Details
The underbust band adjusts via silver buckle sliders on each side, accommodating underbust measurements of roughly 65 cm to 95 cm. The shoulder straps are independently adjustable, so torso length between roughly 38 cm and 50 cm (nape to underbust) is covered. The band width of 6 cm sits firmly below the bust without riding up during movement. Very petite frames under 65 cm underbust or plus sizes above 100 cm underbust may find the adjustment range tight — measure before ordering.
- Underbust adjustment range: approx. 65 cm to 95 cm
- Torso length range: approx. 38 cm to 50 cm
- Band height: approx. 6 cm for defined underbust framing
- Independent shoulder strap buckles for custom fit
- Not recommended for underbust measurements below 65 cm or above 100 cm
Strap Width & Hardware Construction
The shoulder straps measure approximately 1.5 cm wide, keeping a sleek profile without bulk. All hardware — O-rings, buckle adjusters, and rivet studs — is silver-tone metal. The five O-rings are individually linked, not welded in a block, so they flex slightly with movement. The rivet studs securing the strap junctions are flat-head and smooth against the skin.
- Shoulder strap width: approx. 1.5 cm
- Five individually linked silver O-rings at center front
- Silver-tone buckle adjusters on both band sides and both shoulder straps
- Flat-head rivet studs at all junction points
Material & Care Instructions
The harness is made from smooth red faux leather (PU-coated fabric) — it has the structured look of leather with lighter weight and easier care. The back of the material is fabric-backed, reducing skin friction during extended wear. Wipe clean with a damp cloth; do not machine wash or submerge in water, as prolonged moisture can lift the PU coating at seams. Store flat or loosely rolled to avoid permanent crease lines in the band.
- Outer: smooth PU faux leather, red colorway
- Back layer: fabric-backed for reduced skin friction
- Clean with damp cloth only — no machine washing
- Avoid prolonged moisture near seams to protect PU coating
- Store flat or loosely rolled — avoid sharp creases in the wide band
WHAT OTHER PRODUCTS ARE AVAıLABLE in OUR OTHER CATEGORIES?
Red Faux Leather Underbust Harness with Stacked O-Ring Front
$28.35
