Red Faux Leather Waist Belt with Detachable Cuffs & Collar

This 3-piece red faux leather waist belt set ships as a complete accessory kit: a wide structured waist belt (approximately 8 cm wide), two detachable wrist cuffs, and a matching choker collar — all in bold red with contrasting black trim edging and silver-tone metal hardware throughout.

Waist Belt Construction

The centrepiece is a rigid-form waist belt cut from smooth red faux leather with a black leather-trim border that runs along both top and bottom edges, giving each piece a crisp two-tone finish. A silver O-ring at center front serves as the connection point for the included cuff chain links, and four evenly spaced silver rivets reinforce the buckle zone. The belt fastens via a silver-tone metal buckle at the back and covers waist sizes from roughly 60 cm to 90 cm depending on the adjustment setting chosen.

• Wide structured waist panel, approximately 8 cm tall, red faux leather body
• Black contrast trim along top and bottom edges for a two-tone finish
• Silver center-front O-ring for cuff chain attachment
• Four silver rivets reinforcing the buckle area
• Adjustable buckle closure, fits waists approximately 60-90 cm

Detachable Cuffs and Collar

Both wrist cuffs share the same red-and-black two-tone construction as the belt, with padded interior lining and silver rectangular buckle hardware for a snug, adjustable fit at the wrist. A short silver chain connector links each cuff to the belt's side O-rings, and the connectors unclip completely when you want to wear the cuffs or belt independently. The choker collar matches in red faux leather with black trim and carries its own silver O-ring at the front center; it sits roughly 3-4 cm wide and fastens at the nape with a buckle.

• Two wrist cuffs, each with padded inner lining and silver buckle, adjustable to wrist sizes 14-22 cm
• Silver chain connectors clip from belt O-rings to cuffs — fully detachable in seconds
• Matching choker collar, approximately 3-4 cm wide, with front O-ring detail
• All three pieces share identical hardware finish for a coordinated look

Styling and Occasion

Worn as a full set, this red waist belt works over a sheer black bodysuit or a fitted monochrome mini dress for club nights and themed costume events. For a lower-key everyday fashion look, detach the cuffs and wear only the belt over a structured blazer or cropped leather jacket — the wide silhouette accentuates the waist without adding bulk. The choker pairs separately with casual streetwear or layered chain necklaces. Note: because the red faux leather does not stretch, sizing the belt correctly at purchase is important — it will not expand like a fabric cincher.

Sizing and Fit

The waist belt is best suited to waist measurements between 60 cm and 90 cm; wearers outside this range may find the buckle either too tight or unable to hold position. Wrist cuffs adjust from approximately 14 cm to 22 cm in circumference, accommodating most wrist sizes from XS through XL. The choker collar fastens with multiple buckle positions and suits neck sizes from roughly 30 cm to 40 cm. If your waist measurement is close to the upper limit, size up one position on the buckle to avoid creasing the faux leather panel.

Material and Care

All three pieces use smooth-finish faux leather (PU coated synthetic fabric) with a firm inner backing that holds the belt's structured shape. The wrist cuff interiors have a thin padded fabric lining for comfort during wear. Hardware is silver-tone zinc alloy. Wipe clean with a slightly damp cloth and mild soap — do not submerge in water or machine wash, as prolonged moisture will weaken the PU coating. Store flat or loosely rolled to prevent permanent creasing in the waist panel.