Reflective Full Body Harness with Detachable Chain Leash

This white reflective full body harness covers the torso from collar to upper thigh with a structured multi-strap design. The high-collar neckline, dual circular bust rings, triple-band waist section, and four vertical leg straps are all cut from the same bright-white faux leather material that catches light dramatically — the reflective finish makes it visible in low-light festival environments.

Strap Layout and Hardware

The harness runs in a single interconnected system so every piece holds its position when worn. Two wide shoulder straps drop from the collar to the bust rings, which are approximately 7 cm in diameter. Three horizontal waist bands sit stacked across the midsection, each secured with black metal side-release buckles. From the lowest waist band, four vertical straps descend and terminate mid-thigh, mimicking a garter-belt silhouette without requiring stockings.

• High collar band with single front O-ring attachment point for the chain leash
• Two circular bust rings — approximately 7 cm diameter — integrated into chest straps
• Triple-stack waist section with individual black metal buckle adjustments
• Four vertical leg straps extending roughly 30 cm below the waist band
• Detachable dark-metal chain leash clips on and off without tools

Festival and Boudoir Styling

Worn over a black turtleneck and wide-leg trousers, the white straps create a graphic overlay look suited to rave or festival crowds. For a boudoir or lingerie-style shoot, pair it directly over bare skin with high-waist briefs — the leg straps frame the hips without covering them. The collar adds structure at the neckline that reads as a choker from the front, so it functions as visible jewelry as well as harness architecture.

• Layer over a fitted long-sleeve top for a street-to-club festival outfit
• Wear with high-waist briefs for boudoir photography with strong geometric lines
• Combine with a mesh bodysuit to soften the strap contrast against pale fabrics

Sizing and Fit

The adjustable buckle system accommodates a bust range of roughly 75-100 cm and a waist range of 60-90 cm. Leg straps hang freely and do not attach at the ankle, so leg length is not a limiting factor. The collar band adjusts to neck circumferences between approximately 32 and 42 cm. If you measure at the upper end of those ranges, the triple waist bands will sit closer together and the overall look will be slightly more compressed — a genuine trade-off to note before sizing up.

Material and Care

The straps are faux leather (PU-coated fabric), which gives the harness its stiff, structured silhouette and glossy-reflective surface. Hardware consists of black metal O-rings and side-release buckles. The material is not machine washable — wipe down with a damp cloth and mild soap, then air-dry flat away from direct heat. Avoid prolonged skin contact in high-heat conditions, as PU material does not breathe and may cause discomfort during extended wear.

• PU faux leather body — stiff enough to hold shape without an inner frame
• Reflective finish visible in camera flash and stage lighting
• Black metal hardware — O-rings and side-release buckles
• Spot-clean only; do not machine wash or tumble dry
• Not suited for extended wear in warm weather due to non-breathable material