Reflective Full Body Harness with Garter Straps

This reflective full body harness set consists of three interconnected pieces: a dual-band chest harness, a hip cage with adjustable waist strap, and two thigh-band garters connected via O-ring hardware — all crafted from high-visibility reflective tape that glows bright white under direct light. The complete set covers torso, hips, and upper thighs for a structured, layered look without a single piece of fabric between the bands.

Festival and Boudoir Styling

The reflective finish was built for low-light environments: worn over a black bodysuit or sheer mesh top at a night festival, each strap catches light from metres away. For boudoir or editorial shoots, pair the chest harness alone over a neutral bra and high-waisted briefs. The garter thigh bands layer over fishnet stockings or bare skin equally well. Two concrete combinations that work: (1) chest harness over a cropped ribbed tank with wide-leg trousers for an urban-edge daytime look; (2) full three-piece set over a black unitard for a rave or themed party.

Chest and Hip Fit Range

The chest section features two parallel horizontal bands that sit above and below the bust; the adjustable sliders allow a bust circumference of roughly 70 cm to 105 cm. The hip cage adjusts from approximately 65 cm to 100 cm at the waist. Thigh bands fit thigh circumferences of roughly 45 cm to 65 cm. The set is sized as a single adjustable unit — it does not come in separate cup or waist sizes. Buyers with a thigh circumference above 65 cm may find the thigh bands feel tight; this is an honest limitation of the one-size elastic construction.

• Chest band span: adjustable from 70 cm to 105 cm bust circumference
• Hip cage: adjustable from 65 cm to 100 cm waist circumference
• Thigh rings: adjustable from 45 cm to 65 cm thigh circumference
• Best fit for UK 6-14 / EU 34-42 frame

Reflective Tape Material and Care

The straps are made from 3M-style retroreflective elastic tape — a woven elastic base laminated with a glass-bead reflective coating. This gives the bright white glow in low-light settings. Hardware consists of black metal O-rings and small black metal studs; there is no zip or buckle closure — all adjustment is via sliding metal loop hardware. Because the reflective coating is surface-laminated, hand washing in cold water below 30 degrees C is recommended; machine washing or wringing can delaminate the reflective layer over time.

• Material: reflective elastic tape with glass-bead retroreflective coating
• Hardware: black metal O-rings and stud rivets throughout
• Care: hand wash cold, do not wring, air dry flat to preserve reflective layer
• Do not iron directly on the reflective surface

What the Set Includes

The package contains all three harness components as shown: the dual-band chest harness, the hip-and-waist cage piece, and the two matching thigh garter bands. All pieces use the same reflective tape and black hardware for a consistent look. Worn as a full set, the layered strap coverage runs from the chest down to just above the knee. This is a fashion accessory harness — it is not load-bearing or designed for any suspension use. Buyers looking for a single-piece chest harness only may find the full set more coverage than needed; the chest piece can be worn independently.