Reflektörlü (Karanlıkta Parlayan) Omuz Detaylı Şık Erkek Göğüs Harness, 3 Çizgili Harness

The Asymmetrical Reflective Chest Harness crosses one shoulder with three fanning straps that converge at a silver-tone metal O-ring, then a single horizontal strap runs across the chest — all in a white reflective faux leather that catches and throws light under UV and flash. Unlike symmetrical two-shoulder designs, this harness drapes entirely on the left shoulder, leaving the right side bare for a deliberately off-balance silhouette.

Night-Out Styling Options

Worn over a plain black fitted tee it reads as an accessory layer for club nights; pulled straight onto bare skin it becomes the focal piece for open-air festivals or Pride events. The white reflective surface photographs sharply under flash photography, making it a natural choice for stage performances or editorial shoots. Pair with slim black trousers and chunky boots to keep the eye on the harness construction, or layer under an open mesh top for a textural contrast.

• Club and festival wear: reflective finish activates under strobe and UV lighting
• Editorial and stage: high-contrast white against bare skin reads clearly on camera
• Layered streetwear: sits flat enough to fit under an open jacket or oversized blazer

Sizing and Strap Fit

The harness uses buckle closures on the shoulder and chest straps, allowing chest circumference adjustment across roughly 80-110 cm. The shoulder strap length is also adjustable, accommodating shoulder widths from approximately 38 cm to 48 cm. Broader builds above 110 cm chest may find the horizontal strap sits higher than intended; the design works best on lean to athletic frames. Strap width is approximately 2 cm throughout, keeping weight light and contact minimal on skin.

• Chest fit range: approximately 80-110 cm
• Shoulder width range: approximately 38-48 cm
• Strap width: approximately 2 cm throughout
• Not recommended for chest measurements above 115 cm — strap tension becomes uneven

Material and Care

Straps are cut from white reflective faux leather — a PU-coated textile with a metallized reflective layer on the face. The reflective coating responds to direct light sources but can scratch if folded sharply or stored against rough surfaces. Wipe clean with a damp cloth only; do not submerge, machine wash, or use solvents, as these strip the reflective coating. Store flat or loosely rolled; avoid stacking heavy items on top. Hardware is silver-tone zinc alloy — rust-resistant under normal indoor use but keep away from prolonged moisture.

• Faux leather (PU) with reflective metallized coating
• Silver-tone zinc alloy O-ring and buckle hardware
• Wipe clean with damp cloth; no machine washing
• Store flat to protect the reflective surface from creasing
• Hardware is corrosion-resistant but not waterproof

Key Construction Details

Three straps fan from a single point at the shoulder and merge into one ring junction — this convergence point is the structural anchor for the whole harness. The horizontal chest strap attaches directly to the ring at center and hooks to the back via a separate buckle, so tension is distributed across both the shoulder fan and the torso band. There are no padding inserts or lining, which keeps the profile slim but means prolonged wear may create mild pressure at the O-ring contact point on skin. Total weight is under 150 g, making it comfortable for multi-hour event use.