Sık Deri Püsküllü Bel Kemer Harness

This waist harness wraps the midsection with two parallel horizontal faux leather straps, each fastened by a silver metal buckle, and finished with long black tassels that hang from silver O-rings at either hip. Unlike single-band belts, the double-strap silhouette frames the natural waist and creates a structured look over dresses, crop tops, or oversized shirts.

Styling & Occasion

The double-strap layout pairs cleanly with a wide range of everyday outfits. Worn over a flowy midi dress it anchors the waistline without adding bulk. Layer it over a tucked-in oversized blazer for an affordable yet editorial street-style look, or cinch it over a fitted turtleneck for a night out. The tassels move with each step, so pieces with minimal pattern work best.

• Over a solid-color midi dress for a defined, fashion-forward silhouette
• On top of an oversized blazer, belted at the natural waist for structure
• Paired with high-waisted trousers and a simple crop for a layered daily look

Waist Sizing & Fit Notes

The two straps adjust independently via silver pin buckles, accommodating a waist range of approximately 60 cm to 90 cm. Each strap sits about 3 cm to 4 cm apart when worn, so the harness works best on a defined waist rather than a straight torso. It is not recommended for waists above 90 cm as the tassels may not hang vertically. Tighten both buckles to the same hole number to keep straps parallel.

• Adjustable waist range: approximately 60 cm to 90 cm
• Strap width: approximately 1.5 cm each
• Tassel length: approximately 20 cm from O-ring
• Not suited for waists above 90 cm without custom extension
• Best on natural waist — hip placement loses the framing effect

Faux Leather Material & Care

The straps are made from smooth black vegan leather (PU-coated fabric), which gives a glossy finish similar to polished belt leather but without animal-derived materials. The hardware — buckles, O-rings, and tassel caps — is silver-tone zinc alloy. PU faux leather can crack with repeated sharp bending, so avoid folding the straps tightly during storage; roll loosely or hang flat. Wipe clean with a dry or slightly damp cloth only — do not submerge in water or machine wash.

• Material: smooth PU vegan leather over woven base
• Hardware: silver-tone zinc alloy buckles and O-rings
• Care: wipe with dry cloth; do not machine wash
• Storage: hang flat or roll loosely to prevent cracking

Tassel Detail & Hardware

Each side carries a cluster of long black faux leather tassels attached through a solid silver O-ring looped to the outer end of the lower strap. The tassels measure roughly 20 cm and swing freely, adding movement to otherwise minimal outfits. The O-ring also makes the harness compatible with clip-on chain accessories if you want to customize the silhouette further. This is a purely decorative connection point — it is not load-bearing.