Şık Erkek Gömlek Kemeri, Erkek Pantolon Askısı, Deri Göğüs Harness

The X-Back Faux Leather Body Harness features a cross-back strap configuration in smooth black faux leather, with two gold-tone O-rings positioned at the chest and waist for a structured, layered silhouette over any outfit. Unlike single-band chest harnesses, this design routes straps from both shoulders, crossing at the sternum and continuing down the torso to waistband-level clips — covering more of the body with a geometric frame.

Adjustable Buckle Fit

Every strap section features a metal roller buckle that lets you dial in the fit independently across the chest, shoulders, and waist. The shoulder straps adjust approximately 10 cm in each direction, while the vertical torso straps offer around 8 cm of play, making the harness wearable on chest sizes ranging roughly from 80 cm to 110 cm. The waist clips attach to trouser or belt loops at the lower end, anchoring the harness so it stays flat against the body during movement. Note that the clip anchors work best on garments with sturdy loops — lightweight waistbands may allow some shift.

• Shoulder strap adjustment range: approximately 10 cm per side
• Vertical torso strap adjustment: approximately 8 cm
• Chest coverage: fits roughly 80 cm to 110 cm circumference
• All buckles in gold-tone metal with a satin finish
• Waist clips hook onto trouser loops or belt loops to anchor the lower frame

Chest and Waist O-Ring Detail

Two solid O-rings — one centered at chest height and one at the waist — serve as the structural junction points where crossing straps converge. The gold-tone O-rings measure approximately 3 cm in internal diameter, large enough to read clearly as a design element at a distance. The rivets along each strap are pressed flush to the surface, so the hardware sits flat against the skin without digging in during wear.

• Dual O-rings at chest and waist junctions, approximately 3 cm internal diameter
• Flat-set rivets along shoulder and torso straps
• Gold-tone hardware throughout — no mixed metal finishes
• Hardware edges are rolled, reducing direct skin contact at contact points

Styling and Occasion

Worn over a plain white crew-neck tee, the black straps create a sharp contrast that reads well in both casual and night-out contexts. For a festival or concert look, layer it over a black ribbed tank and pair with cargo trousers — the waist clips integrate neatly into the belt loops. At a club event, wearing it directly over bare skin with black jeans (as shown) emphasizes the geometric torso frame. The full-body span means it works as a standalone statement piece rather than a supplement to another layer, so it suits confident, minimal styling best. It is not suited to wearing under structured tailoring, as the shoulder straps will create visible bulk under a fitted blazer.

Material and Care

The straps are cut from vegan faux leather with a smooth, matte surface — not patent or glossy. The material is approximately 2 mm thick, giving the straps a firm, structured drape without stiffness. There is no textile lining on the strap undersides; the back of each strap is finished smooth. To clean, wipe with a slightly damp cloth and allow to air dry flat — do not submerge in water or machine wash, as prolonged moisture softens the strap backing. Store hanging or flat to prevent crease marks from forming at buckle points.