Şık Kadın Deri Kemer, Tarz Kadın Kemer, Elbise Üzeri Kemer

$32.85

Be the first to write one!

Estimated Delivery Date: August 10-11

Color

Size

Discreet Shipping

Plain Packaging

No Content on Invoice

🚚 Discreet packaging — no brand name visible

⚡ Same day dispatch (orders before 2:00 PM)

🔒 256-bit SSL secure checkout

SKU: APFT1129-S1
Weight: 0.200
Categories: Chest Harness

Product Details

Care Instructions	Wipe with damp cloth; no machine wash; store flat or hung
Lining	No lining; single-layer strap construction
Closure	Multi-point pin buckles and spring-clip connector, silver-tone zinc alloy
Material	Faux leather, PU-coated woven fabric backing

Frequently Asked Questions

The punched holes on the main band cover a waist range of approximately 60 cm to 85 cm. The upper and lower straps adjust independently, so you can fine-tune each band separately. Waists above 90 cm will reach the last available hole.

The trailing strap attaches via a spring-clip connector on the left side, so it can be unclipped to leave just the two horizontal waist bands. The clip is the same brushed silver zinc-alloy as the buckles.

This belt uses faux leather — a PU-coated fabric. The surface has a smooth matte finish and is cruelty-free. It does not develop the same patina as genuine leather but resists minor scuffs well.

The hardware is zinc-alloy with a brushed silver plating. Occasional contact with water is fine, but prolonged moisture exposure can dull the finish over time. Wipe dry after any contact with rain or sweat.

Buckle the upper band snugly at your natural waist first, then set the lower band about 4 cm below it. The dual-buckle tension keeps both bands in place on structured outerwear. On very slippery fabrics like satin, tighten one notch tighter than usual.

Product Detail

Black faux leather waist harness belt with silver buckles and a trailing strap for structured, edgy styling.

✓Dual-band waist design with upper strap approx. 2.5 cm wide and slim 1 cm trailing strap
✓Adjustable fit spanning waist sizes approximately 60 cm to 85 cm via punched holes
✓Brushed silver zinc-alloy hardware including rectangular buckle, spring clip, and square sub-buckle
✓Detachable trailing strap via spring-clip connector for two-strap or three-strap silhouette
✓Smooth matte black faux leather (PU) surface wipes clean with a damp cloth
✓Designed for layering over blazers, coats, and dresses — not a standalone garment
✓Not recommended for waist measurements above 90 cm due to limited adjustment range

This black faux leather waist harness belt wraps around the midsection with two horizontal strap layers connected by silver-tone metal buckles and clip hardware, plus a single slim trailing strap that drops below the waistline for an asymmetric finish. Unlike a standard belt, the dual-band construction creates visible waist definition without cinching tightly.

Styling Over Outerwear

The harness sits best over structured garments that hold its shape. Layer it over a white oversized blazer as shown — the black straps contrast sharply against pale fabric for an editorial look. It also works over a longline wool coat or a midi shirt dress worn loose. The trailing strap falls naturally to mid-thigh, so pairing with slim trousers or a bodycon skirt keeps proportions clean. For a more casual take, try it over a loose knit sweater tucked at the front only.

Sharp contrast over white, cream, or camel outerwear
Trailing strap looks best with slim-leg trousers or fitted skirts
Works as a waist accent over dresses at concerts or gallery events

Silver Hardware Details

The hardware includes a rectangular center buckle approximately 3 cm wide, a spring-clip connector on the left side, and a smaller square buckle on the trailing strap. All metal parts have a brushed silver finish. The clip mechanism allows the trailing strap to be detached if you prefer a cleaner double-band silhouette. Note that the hardware is zinc-alloy, not solid brass, so avoid prolonged exposure to moisture to prevent tarnishing.

Rectangular main buckle, approx. 3 cm wide, brushed silver finish
Spring-clip side connector for adjustable drape
Trailing strap buckle adjusts independently from the main band
Zinc-alloy hardware — keep dry to prevent tarnish

Sizing and Fit

The main band is punched with multiple holes spanning a waist range of roughly 60 cm to 85 cm. The upper and lower bands adjust independently via their own buckles, so a slight size difference between high-waist and natural waist is not a problem. The wider upper strap is approximately 2.5 cm wide; the trailing strap is about 1 cm wide. This piece is not designed for waist measurements above 90 cm — the straps would sit near the last hole with minimal adjustment range remaining.

Material and Care

The straps are made from faux leather (PU-coated fabric backing) with a smooth matte surface that does not crease as deeply as genuine leather. Wipe clean with a slightly damp cloth — do not submerge in water or machine wash. Store flat or hanging to avoid permanent kinks in the strap. The matte black finish is resistant to minor surface scuffs but can develop small creases at the buckle holes over time with frequent wear.