Siyah Kadın Kemer Çapraz Detaylı Çoklu Bant

This black faux leather chest harness stands out with its centered X-cross panel flanked by four parallel horizontal straps, creating a structured cage-like frame across the chest. Shoulder straps connect to the horizontal bands via silver-tone metal studs, keeping everything anchored without bulk. It wears over any top or bodysuit as an outer layer accessory.

Styling for Night Out and Festival Wear

Worn over a plain white crop top or bodysuit, the contrast between the black straps and a light base makes the X-detail the focal point of the outfit. For a festival look, layer it over a sheer mesh top with high-waisted shorts; for a night out, pair with a fitted blazer worn open and straight-leg trousers. The structured silhouette works best when the base layer is slim-fitting, since loose fabric under the straps can bunch and disrupt the strap alignment.

• Over a white bodysuit for a sharp black-and-white monochrome contrast
• Layered over a sheer mesh top for a festival-ready layered look
• Worn over a fitted blazer (left open) with tapered trousers for a structured evening outfit

Adjustable Fit and Sizing Range

The shoulder straps and horizontal bands include adjustable buckle closures, allowing the harness to fit a chest circumference of approximately 75 cm to 100 cm. The four horizontal straps sit between the bust and the lower ribcage, so the fit depends on torso length as well as chest width. For torsos shorter than approximately 28 cm (bust to lower ribcage), the lowest strap may sit at the waist rather than the ribs. Those with a chest circumference above 100 cm may find the horizontal straps pull outward and lose their flat, stacked appearance.

• Fits chest circumference approximately 75 cm to 100 cm
• Adjustable shoulder straps with silver-tone metal stud hardware
• Best suited to torso length of 28 cm or more from bust to lower ribcage
• Not recommended for chest circumference above 100 cm if a flat strap appearance is desired

Faux Leather Material and Care

The straps are cut from smooth matte faux leather (PU-coated fabric), giving a firm hand feel without the weight of genuine leather. The surface resists light scuffs but will crease if folded tightly for storage; hanging flat or rolling loosely is preferable. Wipe clean with a slightly damp cloth — do not submerge in water or machine wash, as prolonged moisture exposure degrades the PU coating. The silver-tone hardware is zinc alloy; avoid prolonged contact with perfume or sweat to prevent surface tarnish.

• Matte PU faux leather straps, smooth surface with firm structure
• Silver-tone zinc alloy stud and buckle hardware
• Wipe clean only — do not machine wash or soak
• Store flat or loosely rolled to avoid permanent creasing
• Hardware will tarnish with prolonged perfume or sweat exposure

Wearing as a Daily Layering Piece

Because the harness sits entirely above the waistline, it does not interfere with high-waisted bottoms or belts. The strap width is approximately 1.5 cm, wide enough to hold shape on its own but narrow enough to layer cleanly under an open jacket. This makes it a practical everyday layering piece for those who want an unconventional silhouette without committing to a full outfit overhaul. The X-cross panel adds visual weight to the chest area, which can optically balance wide-hip silhouettes.