Siyah Kadın Kemer Çapraz Detaylı Çoklu Tokalı Vücut Aksesuarı

This black faux leather harness combines an X-back cross strap configuration across the upper chest with a structured four-band waspie waist section, creating a torso-defining silhouette that works as both an outfit layer and a standalone accessory. The waist straps span approximately 20-30 cm in adjustable width, secured by four individual silver-tone rectangular buckles with metal rivet reinforcements at every junction point.

Chest Strap Construction

Two shoulder straps cross at the back in a classic X formation, meeting at a central metal ring at the front chest. Each strap measures approximately 1.5 cm wide, keeping the upper silhouette clean without adding bulk. The crossing back detail is fully visible under open-back tops or jackets, making the harness as much a back accessory as a front one. The single front ring sits at mid-chest and can be threaded with a chain or worn plain.

Waspie Waist Fit & Sizing

The four horizontal waist bands stack from just below the ribcage to the natural waist, covering approximately 12-14 cm of torso height. Each band adjusts independently via its own buckle, so the harness fits waist measurements roughly between 60 cm and 80 cm. Buyers with a waist under 58 cm or over 85 cm may find the strap length insufficient for a secure fit. The bands do not stretch, so sizing up is recommended for waists near the upper limit.

• Four parallel waist straps, each approximately 1.5 cm wide
• Independent buckle adjustment on every band for a customized fit
• Silver-tone rectangular buckles with metal stud rivets at strap junctions
• Recommended waist range: 60-80 cm; outside this range, fit is not guaranteed
• Waist section height covers approximately 12-14 cm of torso

Material & Care

The straps are cut from matte black faux leather (PU-coated fabric), which holds its shape without the stiffness of genuine leather but is less breathable during extended wear. Hardware is silver-tone metal — not plated gold — so it stays consistent with monochrome and dark palettes. Wipe clean with a slightly damp cloth; avoid machine washing or soaking, as prolonged water exposure can cause the PU coating to crack at stress points. Store flat or hanging to prevent permanent creases in the waist bands.

• Faux leather (PU) construction — vegan-friendly and lighter than real leather
• Matte finish reduces visible scratches compared to glossy alternatives
• Silver-tone metal hardware throughout — no mixed finishes
• Wipe-clean only; not suitable for machine washing or soaking
• PU coating may crack at fold points with heavy daily use over time

Styling & Outfit Occasions

Layer the harness directly over a fitted black turtleneck for an editorial monochrome look, letting the waist bands define your natural waist over the fabric. For a bolder approach, wear it as the sole top piece over high-waisted wide-leg trousers for festival or club outings — the four-strap waspie provides enough coverage to function on its own. It also pairs well over a sheer or mesh long-sleeve for cooler weather, where the layering adds visual structure. The X-back detail rewards outfits cut to show the upper back, such as backless dresses or open-back blouses worn underneath.