Siyah Kadın Kemer Çoklu Bantlı Metal Halka Detaylı Vücut Aksesuarı

This black faux leather full body harness wraps the torso with approximately 2 cm wide smooth straps, connecting at multiple silver-tone rectangular buckles and circular O-rings for a structured, geometric silhouette. A small decorative chain hangs from the central front O-ring, adding a subtle hardware accent without overwhelming the design.

Adjustable Fit and Strap Layout

The harness is built around a multi-point adjustment system, so sizing is flexible across a range of torso measurements. The shoulder straps cross at the upper back and clip into the chest band, while the lower waist band sits at the hips. This layered construction means the harness works on torso lengths roughly between 40 cm and 55 cm, and waist circumferences from about 62 cm to 90 cm — though those with very broad shoulders may find the shoulder span slightly narrow.

• Upper shoulder straps adjustable via two silver rectangular buckles
• Center chest band with single front O-ring and attached decorative chain
• Lower hip band fitted with side O-rings for symmetrical framing
• Multiple riveted adjustment points on each strap segment
• All-over matte black strap finish with polished silver hardware contrast

Styling and Occasion

Worn over a fitted black turtleneck, the harness reads as sharp editorial layering for concerts or fashion-forward events. Over a plain white tank top and high-waist trousers, it introduces structure and edge without full costume commitment. For festival dressing, pair it directly over bare skin or a bodysuit — the waist O-rings anchor well to belt loops or can be accessorized with chain extensions. This is not designed as outerwear on its own; the open-frame construction means it always works as a layering piece over another garment or fitted base layer.

• Over turtleneck knit for autumn editorial looks
• Atop a bodysuit for festival and concert outfits
• Layered over a blazer for structured street-style contrast
• Worn on bare skin with high-waist trousers for minimal, statement layering

Sizing and Fit

The harness fits most standard and medium-plus torso frames. The shoulder straps span approximately 35 cm across the upper chest when fully extended, and the waist ring sits at roughly adjustable hip-level. Recommended for bust circumference 80 cm to 105 cm and waist 62 cm to 90 cm. Those with a torso length above 58 cm may find the distance between chest and hip bands shorter than expected. The design is gender-neutral in construction but sized on a feminine body proportion baseline.

Material and Care

The straps are smooth faux leather (PU-coated synthetic) with no visible lining on the outer surface — the inner side has a soft backing that sits comfortably against skin or fabric layers. Hardware is silver-tone zinc alloy: the rectangular buckles, O-rings, and decorative chain. To maintain the PU surface, wipe clean with a damp cloth only — do not machine wash, do not soak, and avoid prolonged exposure to direct sunlight which can cause PU to crack over time. Store flat or loosely coiled to prevent permanent creasing in the strap material.