Siyah Kadın Kemer Geniş Deri Püskül Detaylı Korse Kemer

This waist cinch is built from pebbled black faux leather cut into a wide, high-rise panel that measures approximately 12 cm at its tallest point, tapering into an open arch at the bottom center. Two black faux leather tassels — each roughly 20 cm long — clip onto silver-tone lobster clasps at the lower corners, so you can swap them out or remove them entirely depending on the look you want.

Tassel Styling Options

Worn with the tassels attached, the cinch works over a fitted midi dress or high-waisted wide-leg trousers for a festival or evening-out outfit. Remove the tassels and the panel reads as a sleek structured belt over a blazer or an oversized shirt tucked in at the front. For everyday use, clip just one tassel off-center for an asymmetric effect. The black-on-black pebbled texture means it photographs well against both light and dark garments.

• Over a slip dress: tassels add movement without extra accessories
• Blazer + straight trousers: tassels off, cinch becomes a minimalist waist accent
• High-waisted skirt: tassels graze the hip for a layered, structured silhouette

Sizing and Fit Notes

The cinch fastens at the back with two small press-stud snaps visible at the sides, giving a fixed circumference. Measure your natural waist before ordering — this style does not have a buckle or lace-up adjustment, so the fit depends entirely on your measurements matching the panel. It is best suited for waist measurements between 66 cm and 76 cm; anything outside that range will either gap at the sides or not close fully. The high-rise front panel covers roughly the lower 12 cm of the torso above the hip.

• Waist range: approximately 66 cm to 76 cm
• Panel height at front: approximately 12 cm
• Fastening: press-stud snaps (non-adjustable)
• Not suitable for waists above 78 cm — panel edges will not meet at back

Faux Leather Material and Care

The body and tassels are made from pebbled-grain faux leather — a polyurethane-coated fabric that mimics cowhide texture without animal products. The surface resists light moisture but should not be soaked or machine-washed. Wipe clean with a damp cloth, allow to air-dry flat, and store away from direct sunlight to prevent the PU coating from cracking over time. The silver-tone lobster clasps are zinc alloy; if they oxidize, a light polish with a dry cloth restores the finish.

• Outer: pebbled-grain polyurethane faux leather
• Hardware: zinc alloy silver-tone lobster clasps
• Care: spot-clean only, no machine wash, no tumble dry
• Storage: lay flat or hang — avoid sharp folds that crack PU coating

Affordable Everyday Accessory

Waist-defining accessories at an affordable price point tend to cut corners on hardware — the lobster clasps here feel substantial for the category, though the press-stud closure means you cannot fine-tune the waist size mid-wear. If you are between sizes, size up and use the tassel clips to draw the eye downward rather than to any slight gap at the side seams. This cinch is a practical choice for anyone building a wardrobe that moves between casual daywear and evening styling without spending on two separate pieces.