Siyah Kadın Kemer Korse Model Çok Tokalı Geniş Kemer

This wide black faux leather underbust harness belt sits just below the bust, creating structured waist definition without lacing or boning. The front panel spans approximately 15 cm in height, shaped to a gentle point at the lower center edge, giving the silhouette a corset-like form. Two silver-tone rectangular buckles fasten at the back for a snug, adjustable fit.

Adjustable Shoulder Straps

Two slim shoulder straps connect at the upper corners of the front panel and run over the shoulders to the back, each fitted with a silver slider buckle. Strap width is approximately 1.2 cm, and the adjustable range covers a bust-to-waist drop suitable for most torso lengths. The straps keep the belt in place during movement, which a stiff wide belt without suspension tends to resist on its own.

• Two independent shoulder straps, each individually adjustable via silver slider buckle
• Strap width approximately 1.2 cm, smooth faux leather surface
• Connects at upper corners of the wide front panel
• Prevents the belt from riding up on the waist during wear

Double Buckle Back Closure

The back closure uses two parallel silver-tone pin buckles stacked vertically on the same strap panel, allowing independent tension adjustment across the upper and lower waist. Multiple punched holes across the strap provide approximately 8 cm of size adjustment range. Note that the dual-strap back design is wider than a standard single-buckle belt and may not lie flat under close-fitting outerwear.

• Two silver-tone pin buckles on the back closure strap
• Approximately 8 cm of adjustment range via pre-punched holes
• Upper and lower waist tension can be set independently
• Silver-tone hardware contrasts against the black faux leather body

Sizing and Fit

The front panel height of approximately 15 cm means this belt covers the lower ribcage fully and sits against the upper hip. It is best suited for waist measurements between 62 cm and 80 cm; those with a shorter torso may find the panel height sits higher than intended. The faux leather panel does not stretch, so accurate waist measurement before sizing is important.

• Fits waist circumference approximately 62 cm to 80 cm
• Front panel height approximately 15 cm
• Not recommended for very short torso proportions
• No stretch in the main panel — size to your natural waist measurement

Material and Care

The belt is constructed from smooth faux leather (PU-coated fabric) throughout — both the wide front panel and the narrow shoulder straps. The back surface is fabric-lined for comfort against the skin. Clean with a slightly damp cloth and allow to air dry; do not submerge in water or machine wash, as prolonged moisture weakens PU bonding. Store flat or loosely rolled to preserve the panel shape.